Bark it Up! Suits and Rave Gear
@barkitup.dog
Custom Rave gear, Fursuits and adoptable Art refs
-
Owners
@zbit.barkitup.dog -Electronics and Management.
@mori.barkitup.dog - Hiatus
Banner art @beeptreat.bsky.social
-
Owners
@zbit.barkitup.dog -Electronics and Management.
@mori.barkitup.dog - Hiatus
Banner art @beeptreat.bsky.social
Pinned
🦊 ZettaLights - Custom LED Harnesses
🎵 Real FFT analysis (8 frequency ranges)
⚡ 600+ LED capacity*
🔋 User-swappable 18650 (6+ hour runtime**)
🔓 Open source everything
💻 Custom engineered PCB
$650-1500+ | Standard or full custom
Pre-orders launch MFF weekend.
Production starts January.
barkitup.dog
🎵 Real FFT analysis (8 frequency ranges)
⚡ 600+ LED capacity*
🔋 User-swappable 18650 (6+ hour runtime**)
🔓 Open source everything
💻 Custom engineered PCB
$650-1500+ | Standard or full custom
Pre-orders launch MFF weekend.
Production starts January.
barkitup.dog
Reposted by Bark it Up! Suits and Rave Gear
#FurFest
Gear looks to be working fairly well!
I'm slightly concerned on the red activity, may look at raising the upper limit of the sensitivity range ...
I got my X right next to a woofer...
Red is a little overactive... Maybe?
:3c
Gear looks to be working fairly well!
I'm slightly concerned on the red activity, may look at raising the upper limit of the sensitivity range ...
I got my X right next to a woofer...
Red is a little overactive... Maybe?
:3c
December 6, 2025 at 1:16 AM
#FurFest
Gear looks to be working fairly well!
I'm slightly concerned on the red activity, may look at raising the upper limit of the sensitivity range ...
I got my X right next to a woofer...
Red is a little overactive... Maybe?
:3c
Gear looks to be working fairly well!
I'm slightly concerned on the red activity, may look at raising the upper limit of the sensitivity range ...
I got my X right next to a woofer...
Red is a little overactive... Maybe?
:3c
Late post for last night's content, but typical con stuff.
@furfest.org
7-point custom with leg strap add-on for @chocomage.bsky.social
Bonus collar and leash!
Bulldog 3-point with leash @riptyde.bsky.social
<3
-Z
@furfest.org
7-point custom with leg strap add-on for @chocomage.bsky.social
Bonus collar and leash!
Bulldog 3-point with leash @riptyde.bsky.social
<3
-Z
December 6, 2025 at 12:58 AM
Late post for last night's content, but typical con stuff.
@furfest.org
7-point custom with leg strap add-on for @chocomage.bsky.social
Bonus collar and leash!
Bulldog 3-point with leash @riptyde.bsky.social
<3
-Z
@furfest.org
7-point custom with leg strap add-on for @chocomage.bsky.social
Bonus collar and leash!
Bulldog 3-point with leash @riptyde.bsky.social
<3
-Z
Going to MFF this weekend?
Keep an eye out for Zetta in 1 of 3 styles of harness.
Stop him for a hug!
Ask questions!
Check out the gear!
Ask him about the (soon to be) 4800 LEDs on his living room ceiling that will run off the same hardware he is carrying around!
Keep an eye out for Zetta in 1 of 3 styles of harness.
Stop him for a hug!
Ask questions!
Check out the gear!
Ask him about the (soon to be) 4800 LEDs on his living room ceiling that will run off the same hardware he is carrying around!
December 4, 2025 at 3:08 PM
Going to MFF this weekend?
Keep an eye out for Zetta in 1 of 3 styles of harness.
Stop him for a hug!
Ask questions!
Check out the gear!
Ask him about the (soon to be) 4800 LEDs on his living room ceiling that will run off the same hardware he is carrying around!
Keep an eye out for Zetta in 1 of 3 styles of harness.
Stop him for a hug!
Ask questions!
Check out the gear!
Ask him about the (soon to be) 4800 LEDs on his living room ceiling that will run off the same hardware he is carrying around!
Worried about the bag getting flagged so made a little demo box using the original hand-assembled PCB and the silicone seal test LED strip
Bag: through no issue
Zetta: flagged for additional pat down screening
TSA agent at the bins:
"What's that? Oh that's cool."
Zetta:
😰
<3
-Z
Bag: through no issue
Zetta: flagged for additional pat down screening
TSA agent at the bins:
"What's that? Oh that's cool."
Zetta:
😰
<3
-Z
December 4, 2025 at 1:30 PM
Worried about the bag getting flagged so made a little demo box using the original hand-assembled PCB and the silicone seal test LED strip
Bag: through no issue
Zetta: flagged for additional pat down screening
TSA agent at the bins:
"What's that? Oh that's cool."
Zetta:
😰
<3
-Z
Bag: through no issue
Zetta: flagged for additional pat down screening
TSA agent at the bins:
"What's that? Oh that's cool."
Zetta:
😰
<3
-Z
IT'S HAPPENING!
MFF Launch Week is a GO!
Pre-orders are open NOW!
Put 'bsky' in the 'Special Requests and/or Feedback' section on the last page of the form for an extra 5% discount off the intro MFF launch pricing.
Payments and production to begin January.
barkitup.dog
<3
-Z
MFF Launch Week is a GO!
Pre-orders are open NOW!
Put 'bsky' in the 'Special Requests and/or Feedback' section on the last page of the form for an extra 5% discount off the intro MFF launch pricing.
Payments and production to begin January.
barkitup.dog
<3
-Z
Bark It Up! - Order Request Form
Thank you for your interest! There are a few things to note for the order process.
=== ORDER PROCESS ===
1. Select your style
2. Fill out measurements (see guide below)
3. Submit form
4. We'll c...
barkitup.dog
December 1, 2025 at 8:52 PM
IT'S HAPPENING!
MFF Launch Week is a GO!
Pre-orders are open NOW!
Put 'bsky' in the 'Special Requests and/or Feedback' section on the last page of the form for an extra 5% discount off the intro MFF launch pricing.
Payments and production to begin January.
barkitup.dog
<3
-Z
MFF Launch Week is a GO!
Pre-orders are open NOW!
Put 'bsky' in the 'Special Requests and/or Feedback' section on the last page of the form for an extra 5% discount off the intro MFF launch pricing.
Payments and production to begin January.
barkitup.dog
<3
-Z
Leash!
Just in time for walk time!
Just in time for walk time!
November 29, 2025 at 1:00 AM
Leash!
Just in time for walk time!
Just in time for walk time!
Little 4 way USB-C cable inside a pack of rechargeable AA and AAA batteries at Costco.
It can charge 3 of my boxes at once on my 18w brick. (1A each charge rate)
Sadly it's sharing power to the USB-A and USB-C ports so I can't also charge my phone...
Will use the AA and AAA somewhere...
<3
-Z
It can charge 3 of my boxes at once on my 18w brick. (1A each charge rate)
Sadly it's sharing power to the USB-A and USB-C ports so I can't also charge my phone...
Will use the AA and AAA somewhere...
<3
-Z
November 28, 2025 at 9:10 PM
Little 4 way USB-C cable inside a pack of rechargeable AA and AAA batteries at Costco.
It can charge 3 of my boxes at once on my 18w brick. (1A each charge rate)
Sadly it's sharing power to the USB-A and USB-C ports so I can't also charge my phone...
Will use the AA and AAA somewhere...
<3
-Z
It can charge 3 of my boxes at once on my 18w brick. (1A each charge rate)
Sadly it's sharing power to the USB-A and USB-C ports so I can't also charge my phone...
Will use the AA and AAA somewhere...
<3
-Z
Pending some materials to make an LED leash, here's the Bulldog style and collar on a good pup.
This will be 1 of 4 styles running around MFF.
Feel free to say hi!
<3
-Z
This will be 1 of 4 styles running around MFF.
Feel free to say hi!
<3
-Z
November 27, 2025 at 9:20 PM
Pending some materials to make an LED leash, here's the Bulldog style and collar on a good pup.
This will be 1 of 4 styles running around MFF.
Feel free to say hi!
<3
-Z
This will be 1 of 4 styles running around MFF.
Feel free to say hi!
<3
-Z
Remake!
The Leg Strap add-on for the last 7-Point build ended up a little too long.
These are 40 LEDs each down from 53.
Seal curing overnight then assembly tomorrow to get them out for MFF next week!
I'll have a few builds with me! Follow the lights if you want to chat!
The Leg Strap add-on for the last 7-Point build ended up a little too long.
These are 40 LEDs each down from 53.
Seal curing overnight then assembly tomorrow to get them out for MFF next week!
I'll have a few builds with me! Follow the lights if you want to chat!
November 26, 2025 at 2:38 PM
Remake!
The Leg Strap add-on for the last 7-Point build ended up a little too long.
These are 40 LEDs each down from 53.
Seal curing overnight then assembly tomorrow to get them out for MFF next week!
I'll have a few builds with me! Follow the lights if you want to chat!
The Leg Strap add-on for the last 7-Point build ended up a little too long.
These are 40 LEDs each down from 53.
Seal curing overnight then assembly tomorrow to get them out for MFF next week!
I'll have a few builds with me! Follow the lights if you want to chat!
Box!
Designed for easy use, even while wearing paws or mitts.
3d printed PETG enclosure.
Integrated clip.
Slide toggle switch for on/off.
Low profile to prevent accidental toggle.
Single push button to change or lock the mode.
Single swappable 18650 battery.
USB-C for run and/or charge.
Designed for easy use, even while wearing paws or mitts.
3d printed PETG enclosure.
Integrated clip.
Slide toggle switch for on/off.
Low profile to prevent accidental toggle.
Single push button to change or lock the mode.
Single swappable 18650 battery.
USB-C for run and/or charge.
November 18, 2025 at 4:07 PM
Box!
Designed for easy use, even while wearing paws or mitts.
3d printed PETG enclosure.
Integrated clip.
Slide toggle switch for on/off.
Low profile to prevent accidental toggle.
Single push button to change or lock the mode.
Single swappable 18650 battery.
USB-C for run and/or charge.
Designed for easy use, even while wearing paws or mitts.
3d printed PETG enclosure.
Integrated clip.
Slide toggle switch for on/off.
Low profile to prevent accidental toggle.
Single push button to change or lock the mode.
Single swappable 18650 battery.
USB-C for run and/or charge.
Work shopping some hook and loop for slight adjustability at some key connection points.
New X design
Allows the leg strap add-ons on the current MFF 7-point build to be modular
Will update with some better photos once the harness is on the fursuit it was measured for
Set for LAUNCH!
<3
-Z
New X design
Allows the leg strap add-ons on the current MFF 7-point build to be modular
Will update with some better photos once the harness is on the fursuit it was measured for
Set for LAUNCH!
<3
-Z
November 18, 2025 at 3:35 PM
Work shopping some hook and loop for slight adjustability at some key connection points.
New X design
Allows the leg strap add-ons on the current MFF 7-point build to be modular
Will update with some better photos once the harness is on the fursuit it was measured for
Set for LAUNCH!
<3
-Z
New X design
Allows the leg strap add-ons on the current MFF 7-point build to be modular
Will update with some better photos once the harness is on the fursuit it was measured for
Set for LAUNCH!
<3
-Z
Got a battery for the multimeter.
Power testing puts my 600+ LED and 6+ hour runtime estimates in the ballpark of EXTREMELY conservative.
TL;DR: there's enough juice to rave all night.
Also run+charge via power bank or swap 18650 batteries.
Either way, the power ceiling is HIGH.
<3
-Z
Power testing puts my 600+ LED and 6+ hour runtime estimates in the ballpark of EXTREMELY conservative.
TL;DR: there's enough juice to rave all night.
Also run+charge via power bank or swap 18650 batteries.
Either way, the power ceiling is HIGH.
<3
-Z
November 11, 2025 at 1:33 AM
Got a battery for the multimeter.
Power testing puts my 600+ LED and 6+ hour runtime estimates in the ballpark of EXTREMELY conservative.
TL;DR: there's enough juice to rave all night.
Also run+charge via power bank or swap 18650 batteries.
Either way, the power ceiling is HIGH.
<3
-Z
Power testing puts my 600+ LED and 6+ hour runtime estimates in the ballpark of EXTREMELY conservative.
TL;DR: there's enough juice to rave all night.
Also run+charge via power bank or swap 18650 batteries.
Either way, the power ceiling is HIGH.
<3
-Z
🦊 ZettaLights - Custom LED Harnesses
🎵 Real FFT analysis (8 frequency ranges)
⚡ 600+ LED capacity*
🔋 User-swappable 18650 (6+ hour runtime**)
🔓 Open source everything
💻 Custom engineered PCB
$650-1500+ | Standard or full custom
Pre-orders launch MFF weekend.
Production starts January.
barkitup.dog
🎵 Real FFT analysis (8 frequency ranges)
⚡ 600+ LED capacity*
🔋 User-swappable 18650 (6+ hour runtime**)
🔓 Open source everything
💻 Custom engineered PCB
$650-1500+ | Standard or full custom
Pre-orders launch MFF weekend.
Production starts January.
barkitup.dog
November 9, 2025 at 10:37 PM
🦊 ZettaLights - Custom LED Harnesses
🎵 Real FFT analysis (8 frequency ranges)
⚡ 600+ LED capacity*
🔋 User-swappable 18650 (6+ hour runtime**)
🔓 Open source everything
💻 Custom engineered PCB
$650-1500+ | Standard or full custom
Pre-orders launch MFF weekend.
Production starts January.
barkitup.dog
🎵 Real FFT analysis (8 frequency ranges)
⚡ 600+ LED capacity*
🔋 User-swappable 18650 (6+ hour runtime**)
🔓 Open source everything
💻 Custom engineered PCB
$650-1500+ | Standard or full custom
Pre-orders launch MFF weekend.
Production starts January.
barkitup.dog
MFF prepping!
New 'Full' 7-Point Style! (with Leg Strap Add-on)
252 LEDs! (+106 LEDs = 358 LEDs)
Designed for a friend in fursuit so excuse the slack! :3
Redesigned 'X' 4-Point Style!
138 LEDs!
Let's gooo!
New 'Full' 7-Point Style! (with Leg Strap Add-on)
252 LEDs! (+106 LEDs = 358 LEDs)
Designed for a friend in fursuit so excuse the slack! :3
Redesigned 'X' 4-Point Style!
138 LEDs!
Let's gooo!
November 9, 2025 at 9:33 PM
MFF prepping!
New 'Full' 7-Point Style! (with Leg Strap Add-on)
252 LEDs! (+106 LEDs = 358 LEDs)
Designed for a friend in fursuit so excuse the slack! :3
Redesigned 'X' 4-Point Style!
138 LEDs!
Let's gooo!
New 'Full' 7-Point Style! (with Leg Strap Add-on)
252 LEDs! (+106 LEDs = 358 LEDs)
Designed for a friend in fursuit so excuse the slack! :3
Redesigned 'X' 4-Point Style!
138 LEDs!
Let's gooo!
Field testing!
Gear night at a local venue.
A lot of fun! Pups, fuzzies, and everything in between!
We got in a bit early to get some action shots before it got bumping.
Gear night at a local venue.
A lot of fun! Pups, fuzzies, and everything in between!
We got in a bit early to get some action shots before it got bumping.
October 27, 2025 at 8:29 PM
Field testing!
Gear night at a local venue.
A lot of fun! Pups, fuzzies, and everything in between!
We got in a bit early to get some action shots before it got bumping.
Gear night at a local venue.
A lot of fun! Pups, fuzzies, and everything in between!
We got in a bit early to get some action shots before it got bumping.
🦊 ZettaLights - Custom LED Harnesses
What makes us different:
🎵 Real FFT analysis (8 frequency ranges)
⚡ 600+ LED capacity*
🔋 User-swappable 18650 (6+ hour runtime**)
🔓 Open source everything
💻 Custom engineered PCB
$500-650+ | Standard or full custom builds
Pre-orders: barkitup.dog
What makes us different:
🎵 Real FFT analysis (8 frequency ranges)
⚡ 600+ LED capacity*
🔋 User-swappable 18650 (6+ hour runtime**)
🔓 Open source everything
💻 Custom engineered PCB
$500-650+ | Standard or full custom builds
Pre-orders: barkitup.dog
October 25, 2025 at 6:40 PM
🦊 ZettaLights - Custom LED Harnesses
What makes us different:
🎵 Real FFT analysis (8 frequency ranges)
⚡ 600+ LED capacity*
🔋 User-swappable 18650 (6+ hour runtime**)
🔓 Open source everything
💻 Custom engineered PCB
$500-650+ | Standard or full custom builds
Pre-orders: barkitup.dog
What makes us different:
🎵 Real FFT analysis (8 frequency ranges)
⚡ 600+ LED capacity*
🔋 User-swappable 18650 (6+ hour runtime**)
🔓 Open source everything
💻 Custom engineered PCB
$500-650+ | Standard or full custom builds
Pre-orders: barkitup.dog
Open Source?
Yes!
Testing has succeeded and I think it's in a working state.
Engineered PCB design files, firmware, and current 2.0 Arduino code.
www.patreon.com/posts/141779...
Yay!
<3
-Z
Yes!
Testing has succeeded and I think it's in a working state.
Engineered PCB design files, firmware, and current 2.0 Arduino code.
www.patreon.com/posts/141779...
Yay!
<3
-Z
Open Source! Soft-Launch | BarkItUp
Get more from BarkItUp on Patreon
www.patreon.com
October 22, 2025 at 11:11 AM
Open Source?
Yes!
Testing has succeeded and I think it's in a working state.
Engineered PCB design files, firmware, and current 2.0 Arduino code.
www.patreon.com/posts/141779...
Yay!
<3
-Z
Yes!
Testing has succeeded and I think it's in a working state.
Engineered PCB design files, firmware, and current 2.0 Arduino code.
www.patreon.com/posts/141779...
Yay!
<3
-Z
Slightly thrown together in 2 evenings so it can be tested tonight and at other events!
Reconsidering the heat shrink on the links or perhaps more exact measure of wiring and shrink.
Will see how it holds up in testing!
<3
-Z
Reconsidering the heat shrink on the links or perhaps more exact measure of wiring and shrink.
Will see how it holds up in testing!
<3
-Z
October 17, 2025 at 3:13 PM
Slightly thrown together in 2 evenings so it can be tested tonight and at other events!
Reconsidering the heat shrink on the links or perhaps more exact measure of wiring and shrink.
Will see how it holds up in testing!
<3
-Z
Reconsidering the heat shrink on the links or perhaps more exact measure of wiring and shrink.
Will see how it holds up in testing!
<3
-Z
Oh yeah!
We got a business card!
Testing the hardware at a few local venues in the coming weeks.
Pre-order soft launch to follow!
<3
-Z
We got a business card!
Testing the hardware at a few local venues in the coming weeks.
Pre-order soft launch to follow!
<3
-Z
October 16, 2025 at 2:26 PM
Oh yeah!
We got a business card!
Testing the hardware at a few local venues in the coming weeks.
Pre-order soft launch to follow!
<3
-Z
We got a business card!
Testing the hardware at a few local venues in the coming weeks.
Pre-order soft launch to follow!
<3
-Z
All the pieces are in place, time to start building!
This one will have plastic buckles and stainless steel hardware due to a nickel sensitivity of the wearer.
Testing layouts and some application of heat shrink for a little extra protection!
This one will have plastic buckles and stainless steel hardware due to a nickel sensitivity of the wearer.
Testing layouts and some application of heat shrink for a little extra protection!
October 10, 2025 at 2:51 PM
All the pieces are in place, time to start building!
This one will have plastic buckles and stainless steel hardware due to a nickel sensitivity of the wearer.
Testing layouts and some application of heat shrink for a little extra protection!
This one will have plastic buckles and stainless steel hardware due to a nickel sensitivity of the wearer.
Testing layouts and some application of heat shrink for a little extra protection!
Hm yes lovely.
Was doing the finishing touches before the nose and mouth inserts and pulled too hard on the backing on the left side. Now I have to replace the red parts that are taped for the pattern.
Other than that hiccup, the head is almost done.
The fursuit makers chacha never ends.
-Mori
Was doing the finishing touches before the nose and mouth inserts and pulled too hard on the backing on the left side. Now I have to replace the red parts that are taped for the pattern.
Other than that hiccup, the head is almost done.
The fursuit makers chacha never ends.
-Mori
October 8, 2025 at 12:57 AM
Hm yes lovely.
Was doing the finishing touches before the nose and mouth inserts and pulled too hard on the backing on the left side. Now I have to replace the red parts that are taped for the pattern.
Other than that hiccup, the head is almost done.
The fursuit makers chacha never ends.
-Mori
Was doing the finishing touches before the nose and mouth inserts and pulled too hard on the backing on the left side. Now I have to replace the red parts that are taped for the pattern.
Other than that hiccup, the head is almost done.
The fursuit makers chacha never ends.
-Mori
Box! v2!
Clear(ish) PETG, slightly thicker walls, snap lid on top and bottom.
Clip!
Adding a little switch cover/extension for the power switch, but this is the final revision for now!
(Special thanks to co-worker with new Bambu printer for multiple revisions and test prints)
Clear(ish) PETG, slightly thicker walls, snap lid on top and bottom.
Clip!
Adding a little switch cover/extension for the power switch, but this is the final revision for now!
(Special thanks to co-worker with new Bambu printer for multiple revisions and test prints)
October 1, 2025 at 9:42 PM
Box! v2!
Clear(ish) PETG, slightly thicker walls, snap lid on top and bottom.
Clip!
Adding a little switch cover/extension for the power switch, but this is the final revision for now!
(Special thanks to co-worker with new Bambu printer for multiple revisions and test prints)
Clear(ish) PETG, slightly thicker walls, snap lid on top and bottom.
Clip!
Adding a little switch cover/extension for the power switch, but this is the final revision for now!
(Special thanks to co-worker with new Bambu printer for multiple revisions and test prints)
Boards!
Finishing touches on enclosure box to be revealed soon!
Finishing touches on enclosure box to be revealed soon!
October 1, 2025 at 2:34 AM
Boards!
Finishing touches on enclosure box to be revealed soon!
Finishing touches on enclosure box to be revealed soon!
Don't mind the mess. (And all the posts on sites that is all Barkitup related)
95% done (pinned), Need finishing touches - nose and teeth.
I hope it gets done This October or I'm going to cry lol. I feel bad that I've been going so slow, but sickness took over and I needed a long rest.
-Mori
95% done (pinned), Need finishing touches - nose and teeth.
I hope it gets done This October or I'm going to cry lol. I feel bad that I've been going so slow, but sickness took over and I needed a long rest.
-Mori
September 30, 2025 at 8:56 AM
Don't mind the mess. (And all the posts on sites that is all Barkitup related)
95% done (pinned), Need finishing touches - nose and teeth.
I hope it gets done This October or I'm going to cry lol. I feel bad that I've been going so slow, but sickness took over and I needed a long rest.
-Mori
95% done (pinned), Need finishing touches - nose and teeth.
I hope it gets done This October or I'm going to cry lol. I feel bad that I've been going so slow, but sickness took over and I needed a long rest.
-Mori
I apologize for the double post, was just fixing something!
-Mori
-Mori
September 30, 2025 at 8:29 AM
I apologize for the double post, was just fixing something!
-Mori
-Mori