Grant @3D Musketeers
@3dmusketeers.bsky.social
3D Printing, 3D Scanning, and Content Creation! Making Awesome Daily!
https://3dmusketeers.com
https://youtube.com/@3dmusketeers
Business: [email protected]
https://3dmusketeers.com
https://youtube.com/@3dmusketeers
Business: [email protected]
Nothing in this week’s #PrintFix Friday is as it should be! The bottom layers are peeling off a print, a nozzle snapped in half, and IPA’s gone slimy! PLUS, the devastating photos taken after a @bambulabglobal.bsky.social’s tumble down the stairs. Come check it out! (Link in comment)
December 5, 2025 at 7:43 PM
Nothing in this week’s #PrintFix Friday is as it should be! The bottom layers are peeling off a print, a nozzle snapped in half, and IPA’s gone slimy! PLUS, the devastating photos taken after a @bambulabglobal.bsky.social’s tumble down the stairs. Come check it out! (Link in comment)
We were invited out to Shanghai, China to take a look at Fibreseek's latest offering. This is a close look at the FibreSeeker 3, a desktop continuous carbon fiber 3D printer, where you can see the motion system, fiber layup, and overall print quality in action. (Link in comment!)
November 29, 2025 at 7:16 PM
We were invited out to Shanghai, China to take a look at Fibreseek's latest offering. This is a close look at the FibreSeeker 3, a desktop continuous carbon fiber 3D printer, where you can see the motion system, fiber layup, and overall print quality in action. (Link in comment!)
It’s a first on this week’s #PrintFix Friday as we are going REMOTE from PRAGUE! And it’s a doozy of an episode, from flaming Rat Rigs to a Snapmaker print fail courtesy of guest star and fellow YouTuber Día de la Toalla! It’s a weird one this week and you won’t want to miss it! (Link in comment)
November 28, 2025 at 7:15 PM
It’s a first on this week’s #PrintFix Friday as we are going REMOTE from PRAGUE! And it’s a doozy of an episode, from flaming Rat Rigs to a Snapmaker print fail courtesy of guest star and fellow YouTuber Día de la Toalla! It’s a weird one this week and you won’t want to miss it! (Link in comment)
It’s the clash of the PR debacles in this week’s #PrintFix: @elegoo.bsky.social’s commitment to the Centauri Carbon’s multimaterial functionality was called into question, and @flashforge.bsky.social indicated they’re snooping on your prints! You’ll want to watch this one! (Link in comment)
November 21, 2025 at 7:20 PM
It’s the clash of the PR debacles in this week’s #PrintFix: @elegoo.bsky.social’s commitment to the Centauri Carbon’s multimaterial functionality was called into question, and @flashforge.bsky.social indicated they’re snooping on your prints! You’ll want to watch this one! (Link in comment)
It’s a tug of war fight like you’ve never seen: A BMW on the left, a Tesla on the right, and in between, one of two carbon fiber 3D prints. Who will snap under pressure, the chopped carbon fiber, or the continuous courtesy of Fibreseek? Watch to find out! (Link in comments)
November 17, 2025 at 7:02 PM
It’s a tug of war fight like you’ve never seen: A BMW on the left, a Tesla on the right, and in between, one of two carbon fiber 3D prints. Who will snap under pressure, the chopped carbon fiber, or the continuous courtesy of Fibreseek? Watch to find out! (Link in comments)
Are your calipers zeroed correctly?! On this week’s #PrintFix Friday we find out it’s less likely than you think! PLUS inconsistent extrusions on a @creality3d.bsky.social machine, a lone layer line on a carbon fiber part, and we play orientation VS supports! Check it out! (Link in comment)
November 14, 2025 at 7:10 PM
Are your calipers zeroed correctly?! On this week’s #PrintFix Friday we find out it’s less likely than you think! PLUS inconsistent extrusions on a @creality3d.bsky.social machine, a lone layer line on a carbon fiber part, and we play orientation VS supports! Check it out! (Link in comment)
Would it surprise you to know @bambulabglobal.bsky.social software might not be secure? What about @prusa3d.com cameras sending more data than you might think? Or how about @elegoo.bsky.social responding to consumer complaints? All this and more in this week’s #PrintFix Friday! (Link in comment)
November 7, 2025 at 7:51 PM
Would it surprise you to know @bambulabglobal.bsky.social software might not be secure? What about @prusa3d.com cameras sending more data than you might think? Or how about @elegoo.bsky.social responding to consumer complaints? All this and more in this week’s #PrintFix Friday! (Link in comment)
LIVE in 20 for another Making Awesome Podcast episode! Including @prusa3d.com's huge announcements, CORE One L, Construct 3D's latest printer, Fibreseek, and our trip to Shanghai!!
You will not want to miss this one: youtube.com/live/pIItBkb...
LIVE AT NOON EST!!
You will not want to miss this one: youtube.com/live/pIItBkb...
LIVE AT NOON EST!!
Prusa Core One L, Construct 2, and SHANGHAI!! - Making Awesome 246
YouTube video by 3D Musketeers
youtube.com
November 2, 2025 at 4:39 PM
LIVE in 20 for another Making Awesome Podcast episode! Including @prusa3d.com's huge announcements, CORE One L, Construct 3D's latest printer, Fibreseek, and our trip to Shanghai!!
You will not want to miss this one: youtube.com/live/pIItBkb...
LIVE AT NOON EST!!
You will not want to miss this one: youtube.com/live/pIItBkb...
LIVE AT NOON EST!!
Reposted by Grant @3D Musketeers
The @thereal1440.bsky.social Livestream has started for @wck.org
Livestream (day1):
www.youtube.com/live/r8BT68J...
Tiltify:
tiltify.com/@1440makers/...
Current guests:
@3dmusketeers.bsky.social
@tgaw.com
@mrsg33kt3ch.bsky.social
#3dprinting #wck
Livestream (day1):
www.youtube.com/live/r8BT68J...
Tiltify:
tiltify.com/@1440makers/...
Current guests:
@3dmusketeers.bsky.social
@tgaw.com
@mrsg33kt3ch.bsky.social
#3dprinting #wck
November 1, 2025 at 2:28 PM
The @thereal1440.bsky.social Livestream has started for @wck.org
Livestream (day1):
www.youtube.com/live/r8BT68J...
Tiltify:
tiltify.com/@1440makers/...
Current guests:
@3dmusketeers.bsky.social
@tgaw.com
@mrsg33kt3ch.bsky.social
#3dprinting #wck
Livestream (day1):
www.youtube.com/live/r8BT68J...
Tiltify:
tiltify.com/@1440makers/...
Current guests:
@3dmusketeers.bsky.social
@tgaw.com
@mrsg33kt3ch.bsky.social
#3dprinting #wck
Say it ain’t so... Lychee Slicer has dipped their toe into the AI waters, and users are UPSET! We talk about that, as well as a weird line on a bowl, some loops on the bottom of a print, and the second false fire alarm in as many weeks. Don’t miss it! (Link in comment)
October 31, 2025 at 7:31 PM
Say it ain’t so... Lychee Slicer has dipped their toe into the AI waters, and users are UPSET! We talk about that, as well as a weird line on a bowl, some loops on the bottom of a print, and the second false fire alarm in as many weeks. Don’t miss it! (Link in comment)
Do you know where YOUR socks are? Have you checked INSIDE your prints like Mcgybeer had to in this week’s episode of #PrintFix? We also address more burning Bambus and a fire that’s not what it seems, causing us to wonder if we’re talking about fires TOO much... (Link in comment)
October 24, 2025 at 6:06 PM
Do you know where YOUR socks are? Have you checked INSIDE your prints like Mcgybeer had to in this week’s episode of #PrintFix? We also address more burning Bambus and a fire that’s not what it seems, causing us to wonder if we’re talking about fires TOO much... (Link in comment)
Even while we’re in China the #PrintFix Fridays don’t stop! We’ve got resin prints that don’t fit together well, a nozzle that would be VERY difficult to print with, and a correction to a blob fail from last week! PLUS, could this be the start of a concerning Anycubic trend? (Link in comment)
October 17, 2025 at 6:16 PM
Even while we’re in China the #PrintFix Fridays don’t stop! We’ve got resin prints that don’t fit together well, a nozzle that would be VERY difficult to print with, and a correction to a blob fail from last week! PLUS, could this be the start of a concerning Anycubic trend? (Link in comment)
This week, Prusa AND Bambu are doing their best to tear themselves apart! A @prusa3d.com spontaneously ejects its printhead, a @bambulabglobal.bsky.social forces its cover off, and more! PLUS we go into the issue of trapped resin. This is an EXCITING one! (Link in comment)
October 10, 2025 at 6:12 PM
This week, Prusa AND Bambu are doing their best to tear themselves apart! A @prusa3d.com spontaneously ejects its printhead, a @bambulabglobal.bsky.social forces its cover off, and more! PLUS we go into the issue of trapped resin. This is an EXCITING one! (Link in comment)
That Was Fast!! - Making Awesome 245
YouTube video by 3D Musketeers
youtube.com
October 5, 2025 at 4:01 PM
This #PrintFix Friday episode is all about filthy printers and infill-y prints! This is the episode to watch if you’re wondering how your printer got so DIRTY! Plus we return to the ongoing situation with melting Bambu Lab printers. Check out this ep of PrintFixFriday! (Link in comment)
October 3, 2025 at 6:00 PM
This #PrintFix Friday episode is all about filthy printers and infill-y prints! This is the episode to watch if you’re wondering how your printer got so DIRTY! Plus we return to the ongoing situation with melting Bambu Lab printers. Check out this ep of PrintFixFriday! (Link in comment)
Supports need a shave and a Vision Miner is SPARKING in this episode of #PrintFix Friday! ALSO a printer’s bed wobbles like it’s in an earthquake and someone’s prints look a LOT better on the bottom. Tune in now!! (Link in comment)
September 26, 2025 at 6:08 PM
Supports need a shave and a Vision Miner is SPARKING in this episode of #PrintFix Friday! ALSO a printer’s bed wobbles like it’s in an earthquake and someone’s prints look a LOT better on the bottom. Tune in now!! (Link in comment)
LIVE NOW talking all about the @elegoo.bsky.social Centauri Carbon and #opensource.
youtube.com/live/K_sQ2VE...
youtube.com/live/K_sQ2VE...
FOLLOW THE RULES!! - Making Awesome 244
YouTube video by 3D Musketeers
youtube.com
September 21, 2025 at 4:02 PM
LIVE NOW talking all about the @elegoo.bsky.social Centauri Carbon and #opensource.
youtube.com/live/K_sQ2VE...
youtube.com/live/K_sQ2VE...
Resin that’s unexpectedly goopy, a @prusa3d.com Mini that’s surprisingly melty, and the @elegoo.bsky.social Centauri Carbon is apparently in violation of open source laws! We cover all this and much more on this episode of #PrintFix Friday! (Link in comment)
September 19, 2025 at 6:08 PM
Resin that’s unexpectedly goopy, a @prusa3d.com Mini that’s surprisingly melty, and the @elegoo.bsky.social Centauri Carbon is apparently in violation of open source laws! We cover all this and much more on this episode of #PrintFix Friday! (Link in comment)
LIVE NOW!! youtube.com/live/rswN2Cj...
September 14, 2025 at 4:01 PM
LIVE NOW!! youtube.com/live/rswN2Cj...
Live in 30 talking all about @prusa3d.com updates from this week including CORE One VFA, Borderlands, Prusaslicer and more!
youtube.com/live/rswN2Cj...
youtube.com/live/rswN2Cj...
Prusa has been BUSY!! - Making Awesome 243
The past week @Prusa3D has been INSANELY busy between opening up EasyPrint to other manufacturers, new Prusa Slicer releases, CORE One VFA firmware updates, and even FREAKIN @BorderlandsGame 4 and @Pr...
youtube.com
September 14, 2025 at 3:32 PM
Live in 30 talking all about @prusa3d.com updates from this week including CORE One VFA, Borderlands, Prusaslicer and more!
youtube.com/live/rswN2Cj...
youtube.com/live/rswN2Cj...
Sparks, bubbles, and foxes are the highlights of this week’s episode of #PrintFix Friday! An @elegoo.bsky.social Centauri Carbon starts sparking where it shouldn’t, a fox is looking melty, and we solve a past fail that left us stumped! You won’t want to miss this episode! (Link in comment)
September 12, 2025 at 6:30 PM
Sparks, bubbles, and foxes are the highlights of this week’s episode of #PrintFix Friday! An @elegoo.bsky.social Centauri Carbon starts sparking where it shouldn’t, a fox is looking melty, and we solve a past fail that left us stumped! You won’t want to miss this episode! (Link in comment)
LIVE NOW!! youtube.com/live/ckXN1wx...
September 7, 2025 at 4:01 PM
LIVE NOW!! youtube.com/live/ckXN1wx...
Live in 30! Noon Eastern with Jacob talking about Market Segmentation, why it matters, and how you dont need to be cheap to be successful!
Join us live! youtube.com/live/ckXN1wx...
Join us live! youtube.com/live/ckXN1wx...
Choose Wisely!! - Making Awesome 242
YouTube video by 3D Musketeers
youtube.com
September 7, 2025 at 3:34 PM
Live in 30! Noon Eastern with Jacob talking about Market Segmentation, why it matters, and how you dont need to be cheap to be successful!
Join us live! youtube.com/live/ckXN1wx...
Join us live! youtube.com/live/ckXN1wx...
We’re celebrating #PrintFix Friday’s FOUR YEAR anniversary by reading YOUR comments - the good, the bad, and the just plain dumb! If you’ve ever left a snarky comment on a 3D Musketeers video before, check it out! You might be featured... (Link in comment)
4 YEAR ANNIVERSARY of PrintFixFriday! Reading Mean Comments! - PrintFixFriday 208
YouTube video by 3D Musketeers
youtu.be
September 5, 2025 at 6:00 PM
We’re celebrating #PrintFix Friday’s FOUR YEAR anniversary by reading YOUR comments - the good, the bad, and the just plain dumb! If you’ve ever left a snarky comment on a 3D Musketeers video before, check it out! You might be featured... (Link in comment)
LIVE NOW! youtube.com/live/ISx0dkI...
August 31, 2025 at 4:01 PM
LIVE NOW! youtube.com/live/ISx0dkI...