KB3D
@kb3d.co.uk
Owned by @kinkybiologist.bsky.social
Check out the shop: KB3D.co.uk
Here are promotional images for KB3D items. For all new products and news regarding KB3D please follow
Check out the shop: KB3D.co.uk
Here are promotional images for KB3D items. For all new products and news regarding KB3D please follow
Pinned
KB3D
@kb3d.co.uk
· Sep 27
Store Update!
Due to an expected house move in the next few months.
The KB3D store will close on the 4th of October. Until 1st of January.
If everything goes smoother than expected. It may open sooner.
Current orders are unaffected. This is to allow me to move with no orders.
Due to an expected house move in the next few months.
The KB3D store will close on the 4th of October. Until 1st of January.
If everything goes smoother than expected. It may open sooner.
Current orders are unaffected. This is to allow me to move with no orders.
Reposted by KB3D
Store Update!
Due to an expected house move in the next few months.
The KB3D store will close on the 4th of October. Until 1st of January.
If everything goes smoother than expected. It may open sooner.
Current orders are unaffected. This is to allow me to move with no orders.
Due to an expected house move in the next few months.
The KB3D store will close on the 4th of October. Until 1st of January.
If everything goes smoother than expected. It may open sooner.
Current orders are unaffected. This is to allow me to move with no orders.
September 27, 2025 at 11:34 AM
Store Update!
Due to an expected house move in the next few months.
The KB3D store will close on the 4th of October. Until 1st of January.
If everything goes smoother than expected. It may open sooner.
Current orders are unaffected. This is to allow me to move with no orders.
Due to an expected house move in the next few months.
The KB3D store will close on the 4th of October. Until 1st of January.
If everything goes smoother than expected. It may open sooner.
Current orders are unaffected. This is to allow me to move with no orders.
KB3D S10 ExoCap
Capture your exhale from an S10 Gasmask.
No modification required to your Gasmask.
Available now!
www.kb3d.co.uk/product-page...
Capture your exhale from an S10 Gasmask.
No modification required to your Gasmask.
Available now!
www.kb3d.co.uk/product-page...
S10 ExoCap | KB3D 2025
Exhale, Captured. The S10 ExoCap is designed to capture the exhaled air from an unmodified S10 gas mask. The Installation is simple: place the included rubber seal over the so it sits in the groove on...
www.kb3d.co.uk
September 27, 2025 at 11:35 AM
KB3D S10 ExoCap
Capture your exhale from an S10 Gasmask.
No modification required to your Gasmask.
Available now!
www.kb3d.co.uk/product-page...
Capture your exhale from an S10 Gasmask.
No modification required to your Gasmask.
Available now!
www.kb3d.co.uk/product-page...
Reposted by KB3D
New product!!
Introducing the *S10 ExoCap* — an all in one cap, which captures the exhale from an S10 gas mask.
No modification to the gasmask required. Simply add the seal, push on the front. Done.
//Exhale, Captured//
www.kb3d.co.uk/product-page...
Introducing the *S10 ExoCap* — an all in one cap, which captures the exhale from an S10 gas mask.
No modification to the gasmask required. Simply add the seal, push on the front. Done.
//Exhale, Captured//
www.kb3d.co.uk/product-page...
September 27, 2025 at 11:27 AM
New product!!
Introducing the *S10 ExoCap* — an all in one cap, which captures the exhale from an S10 gas mask.
No modification to the gasmask required. Simply add the seal, push on the front. Done.
//Exhale, Captured//
www.kb3d.co.uk/product-page...
Introducing the *S10 ExoCap* — an all in one cap, which captures the exhale from an S10 gas mask.
No modification to the gasmask required. Simply add the seal, push on the front. Done.
//Exhale, Captured//
www.kb3d.co.uk/product-page...
Store Update!
Due to an expected house move in the next few months.
The KB3D store will close on the 4th of October. Until 1st of January.
If everything goes smoother than expected. It may open sooner.
Current orders are unaffected. This is to allow me to move with no orders.
Due to an expected house move in the next few months.
The KB3D store will close on the 4th of October. Until 1st of January.
If everything goes smoother than expected. It may open sooner.
Current orders are unaffected. This is to allow me to move with no orders.
September 27, 2025 at 11:34 AM
Store Update!
Due to an expected house move in the next few months.
The KB3D store will close on the 4th of October. Until 1st of January.
If everything goes smoother than expected. It may open sooner.
Current orders are unaffected. This is to allow me to move with no orders.
Due to an expected house move in the next few months.
The KB3D store will close on the 4th of October. Until 1st of January.
If everything goes smoother than expected. It may open sooner.
Current orders are unaffected. This is to allow me to move with no orders.
Reposted by KB3D
And shoutout to @kinkybiologist.bsky.social for making said parts
July 6, 2025 at 1:20 AM
And shoutout to @kinkybiologist.bsky.social for making said parts
Reposted by KB3D
Have no idea how the RubberBunker blindfolds work but hey at least the original @kb3d.co.uk parts generally work like a breeze (the original lenses made the eye rings a pain but I knew what I was signing up for, hopefully they won’t be as much of a pain to take off if I decide to switch to black)
July 6, 2025 at 1:20 AM
Have no idea how the RubberBunker blindfolds work but hey at least the original @kb3d.co.uk parts generally work like a breeze (the original lenses made the eye rings a pain but I knew what I was signing up for, hopefully they won’t be as much of a pain to take off if I decide to switch to black)
Anyone around the Birmingham area - we will be in your neck of the woods this Sunday at Birmingham Bizarre Bazaar! Come and say Hi :D
July 14, 2025 at 6:58 PM
Anyone around the Birmingham area - we will be in your neck of the woods this Sunday at Birmingham Bizarre Bazaar! Come and say Hi :D
Reposted by KB3D
Got a nice haul from @kinkybiologist.bsky.social ( @kb3d.co.uk ) at the @manchesterrubber.bsky.social market.
Hose converters for NATO40 screws (S10/FM12 masks etc.) to push fit, and a really neat breakaway connector for a quick release (if needed). Really well thought-through designs. #MRW16
Hose converters for NATO40 screws (S10/FM12 masks etc.) to push fit, and a really neat breakaway connector for a quick release (if needed). Really well thought-through designs. #MRW16
June 27, 2025 at 10:08 PM
Got a nice haul from @kinkybiologist.bsky.social ( @kb3d.co.uk ) at the @manchesterrubber.bsky.social market.
Hose converters for NATO40 screws (S10/FM12 masks etc.) to push fit, and a really neat breakaway connector for a quick release (if needed). Really well thought-through designs. #MRW16
Hose converters for NATO40 screws (S10/FM12 masks etc.) to push fit, and a really neat breakaway connector for a quick release (if needed). Really well thought-through designs. #MRW16
@rubberjouva.moufette.com has done a great job on this print! Looks super clean, and I'm a sucker for the black and yellow :')
Love seeing people's prints! Keep the pictures coming :D
-James
Love seeing people's prints! Keep the pictures coming :D
-James
Just printed out a new breath play valve system. Thanks to @kb3d.co.uk for their latest upload to their patreon!
June 26, 2025 at 1:57 PM
@rubberjouva.moufette.com has done a great job on this print! Looks super clean, and I'm a sucker for the black and yellow :')
Love seeing people's prints! Keep the pictures coming :D
-James
Love seeing people's prints! Keep the pictures coming :D
-James
STLs available!
All of our recent redesigns are now available to print at home through patreon:
www.patreon.com/kb3d
This includes the Side Valves, S10 Standard, S10 Table and S10 Curved Fleshlight
- James
All of our recent redesigns are now available to print at home through patreon:
www.patreon.com/kb3d
This includes the Side Valves, S10 Standard, S10 Table and S10 Curved Fleshlight
- James
June 26, 2025 at 1:51 PM
STLs available!
All of our recent redesigns are now available to print at home through patreon:
www.patreon.com/kb3d
This includes the Side Valves, S10 Standard, S10 Table and S10 Curved Fleshlight
- James
All of our recent redesigns are now available to print at home through patreon:
www.patreon.com/kb3d
This includes the Side Valves, S10 Standard, S10 Table and S10 Curved Fleshlight
- James
Product available & STLs on Patreon!
Our Air-System is now available to buy on our website and the STLs are available to download on our Patreon! 2 and 3 valve variants available.
Buy it here: www.kb3d.co.uk/product-page...
Join our Patreon for the STLs here: www.patreon.com/kb3d
Our Air-System is now available to buy on our website and the STLs are available to download on our Patreon! 2 and 3 valve variants available.
Buy it here: www.kb3d.co.uk/product-page...
Join our Patreon for the STLs here: www.patreon.com/kb3d
June 25, 2025 at 6:37 PM
Product available & STLs on Patreon!
Our Air-System is now available to buy on our website and the STLs are available to download on our Patreon! 2 and 3 valve variants available.
Buy it here: www.kb3d.co.uk/product-page...
Join our Patreon for the STLs here: www.patreon.com/kb3d
Our Air-System is now available to buy on our website and the STLs are available to download on our Patreon! 2 and 3 valve variants available.
Buy it here: www.kb3d.co.uk/product-page...
Join our Patreon for the STLs here: www.patreon.com/kb3d
We're VERY excited to be joining you lovely lot at #MRW16 tomorrow! We've been working hard to make sure we've got plenty to show you, including our new Breathplay System. We'll only have a few in both the 2 and 3 attachment variants so make sure you come find us early if you want one!
- James
- James
June 20, 2025 at 2:58 PM
We're VERY excited to be joining you lovely lot at #MRW16 tomorrow! We've been working hard to make sure we've got plenty to show you, including our new Breathplay System. We'll only have a few in both the 2 and 3 attachment variants so make sure you come find us early if you want one!
- James
- James
We'll be debuting our redesigns for several products at #MRW16 on Saturday. Make sure to come and check them out in person and see the improvements for yourself.
They'll be available on our website afterwards and the STLs will eventually be uploaded to patreon.
- James
They'll be available on our website afterwards and the STLs will eventually be uploaded to patreon.
- James
June 19, 2025 at 3:57 PM
We'll be debuting our redesigns for several products at #MRW16 on Saturday. Make sure to come and check them out in person and see the improvements for yourself.
They'll be available on our website afterwards and the STLs will eventually be uploaded to patreon.
- James
They'll be available on our website afterwards and the STLs will eventually be uploaded to patreon.
- James
Come find us at #MRW16 on Saturday for Breakaways for only £5!
The perfect tool for safer and more convenient breathplay. No longer worry about screwing/unscrewing components in a panic, just pull the breakaway apart! Or use it to quickly change between your attachments.
The perfect tool for safer and more convenient breathplay. No longer worry about screwing/unscrewing components in a panic, just pull the breakaway apart! Or use it to quickly change between your attachments.
June 19, 2025 at 12:28 PM
Come find us at #MRW16 on Saturday for Breakaways for only £5!
The perfect tool for safer and more convenient breathplay. No longer worry about screwing/unscrewing components in a panic, just pull the breakaway apart! Or use it to quickly change between your attachments.
The perfect tool for safer and more convenient breathplay. No longer worry about screwing/unscrewing components in a panic, just pull the breakaway apart! Or use it to quickly change between your attachments.
We have officially met our printing targets and we should be well stocked for #MRW16 on Saturday.
Now to figure out how to fit it all in the car...
-James
Now to figure out how to fit it all in the car...
-James
June 18, 2025 at 7:59 AM
We have officially met our printing targets and we should be well stocked for #MRW16 on Saturday.
Now to figure out how to fit it all in the car...
-James
Now to figure out how to fit it all in the car...
-James
Spaghetti for dinner, anyone?
Decided to see what timelapses had been saved on the sd card in the printer - found this beauty!
This is what happens when you don't triple check for floating geometry in your designs 🤦
- James
Decided to see what timelapses had been saved on the sd card in the printer - found this beauty!
This is what happens when you don't triple check for floating geometry in your designs 🤦
- James
June 12, 2025 at 5:20 PM
Spaghetti for dinner, anyone?
Decided to see what timelapses had been saved on the sd card in the printer - found this beauty!
This is what happens when you don't triple check for floating geometry in your designs 🤦
- James
Decided to see what timelapses had been saved on the sd card in the printer - found this beauty!
This is what happens when you don't triple check for floating geometry in your designs 🤦
- James
Product Design: S10 Table
On the left is the new version, on the right is the previous version. The difference in surface quality is pretty clear to see :')
I think that's another design done? What do you all think?
- James
On the left is the new version, on the right is the previous version. The difference in surface quality is pretty clear to see :')
I think that's another design done? What do you all think?
- James
June 6, 2025 at 1:11 PM
Product Design: S10 Table
On the left is the new version, on the right is the previous version. The difference in surface quality is pretty clear to see :')
I think that's another design done? What do you all think?
- James
On the left is the new version, on the right is the previous version. The difference in surface quality is pretty clear to see :')
I think that's another design done? What do you all think?
- James
Product Design: S10 Table
So I have a plan and a design for the table being printed with zero supports... but does anyone else see the similarities here, or is it just me?
- James
So I have a plan and a design for the table being printed with zero supports... but does anyone else see the similarities here, or is it just me?
- James
June 5, 2025 at 9:55 AM
Product Design: S10 Table
So I have a plan and a design for the table being printed with zero supports... but does anyone else see the similarities here, or is it just me?
- James
So I have a plan and a design for the table being printed with zero supports... but does anyone else see the similarities here, or is it just me?
- James
Product Design: S10 Table
The problem: It requires a lot of supports on the underside giving it a really rough looking surface. Yes, we could print it "stood up" but that would compromise it's strength.
The task at hand: come up with a new design that doesn't require so many supports.
-James
The problem: It requires a lot of supports on the underside giving it a really rough looking surface. Yes, we could print it "stood up" but that would compromise it's strength.
The task at hand: come up with a new design that doesn't require so many supports.
-James
June 4, 2025 at 2:44 PM
Product Design: S10 Table
The problem: It requires a lot of supports on the underside giving it a really rough looking surface. Yes, we could print it "stood up" but that would compromise it's strength.
The task at hand: come up with a new design that doesn't require so many supports.
-James
The problem: It requires a lot of supports on the underside giving it a really rough looking surface. Yes, we could print it "stood up" but that would compromise it's strength.
The task at hand: come up with a new design that doesn't require so many supports.
-James
Just a satisfying timelapse of the Side Valve being printed. Enjoy x
- James
- James
June 3, 2025 at 4:18 PM
Just a satisfying timelapse of the Side Valve being printed. Enjoy x
- James
- James
Product design: S10 Standard
Issue: In the new orientation supports were required for the surface that the valve presses against, making the surface rough causing leaks.
Solution: Tweaked it such that supports weren't required. Works a treat!
I think that's another design finished!
- James
Issue: In the new orientation supports were required for the surface that the valve presses against, making the surface rough causing leaks.
Solution: Tweaked it such that supports weren't required. Works a treat!
I think that's another design finished!
- James
June 3, 2025 at 2:13 PM
Product design: S10 Standard
Issue: In the new orientation supports were required for the surface that the valve presses against, making the surface rough causing leaks.
Solution: Tweaked it such that supports weren't required. Works a treat!
I think that's another design finished!
- James
Issue: In the new orientation supports were required for the surface that the valve presses against, making the surface rough causing leaks.
Solution: Tweaked it such that supports weren't required. Works a treat!
I think that's another design finished!
- James
Product design: S10 Standard
Good news and bad news.
Good news: we got the individual bits to fit together
Bad news: despite working on the side valve, this same geometry is leaky in the standard.
The difference? We've had to rotate the whole thing 180degrees...
Time to troubleshoot.
- James
Good news and bad news.
Good news: we got the individual bits to fit together
Bad news: despite working on the side valve, this same geometry is leaky in the standard.
The difference? We've had to rotate the whole thing 180degrees...
Time to troubleshoot.
- James
June 2, 2025 at 4:42 PM
Product design: S10 Standard
Good news and bad news.
Good news: we got the individual bits to fit together
Bad news: despite working on the side valve, this same geometry is leaky in the standard.
The difference? We've had to rotate the whole thing 180degrees...
Time to troubleshoot.
- James
Good news and bad news.
Good news: we got the individual bits to fit together
Bad news: despite working on the side valve, this same geometry is leaky in the standard.
The difference? We've had to rotate the whole thing 180degrees...
Time to troubleshoot.
- James
Product design: The S10 Standard
Now that we have an invertible valve, can we fit it into the S10 standard to allow users can change airflow direction?
The problem: how does it fit? Ideally, we want to keep an internal NATO40 screw thread too for blockers/restrictors.
- James
Now that we have an invertible valve, can we fit it into the S10 standard to allow users can change airflow direction?
The problem: how does it fit? Ideally, we want to keep an internal NATO40 screw thread too for blockers/restrictors.
- James
June 2, 2025 at 10:52 AM
Product design: The S10 Standard
Now that we have an invertible valve, can we fit it into the S10 standard to allow users can change airflow direction?
The problem: how does it fit? Ideally, we want to keep an internal NATO40 screw thread too for blockers/restrictors.
- James
Now that we have an invertible valve, can we fit it into the S10 standard to allow users can change airflow direction?
The problem: how does it fit? Ideally, we want to keep an internal NATO40 screw thread too for blockers/restrictors.
- James
Product Design: S10 Side Valve
While we knew this would also be compatible with the FMJ08 (or S10.2 as some people market them as) and FM12, it looks like this also fits really nicely in the MF-11!
I think I've talked about this side valve enough now. Time for the next project!
- James
While we knew this would also be compatible with the FMJ08 (or S10.2 as some people market them as) and FM12, it looks like this also fits really nicely in the MF-11!
I think I've talked about this side valve enough now. Time for the next project!
- James
May 31, 2025 at 4:51 PM
Product Design: S10 Side Valve
While we knew this would also be compatible with the FMJ08 (or S10.2 as some people market them as) and FM12, it looks like this also fits really nicely in the MF-11!
I think I've talked about this side valve enough now. Time for the next project!
- James
While we knew this would also be compatible with the FMJ08 (or S10.2 as some people market them as) and FM12, it looks like this also fits really nicely in the MF-11!
I think I've talked about this side valve enough now. Time for the next project!
- James