Carl Rydings
@carlrydings.bsky.social
🎓 BSc (Hons)/MSc Graduate
✅ Views my own
❌ Re-post not endorsement
➡️ Reform UK
✅ Views my own
❌ Re-post not endorsement
➡️ Reform UK
🎄 Day #12: Dazzling Displays!
For the final day, we added a 16x2 LCD (with an I2C backpack), brought back our RGB dot strand and temperature sensor. We displayed the current environment data and had the program pick colours for the strand.
#MakerAdventCalendar
#AdventCalendar
For the final day, we added a 16x2 LCD (with an I2C backpack), brought back our RGB dot strand and temperature sensor. We displayed the current environment data and had the program pick colours for the strand.
#MakerAdventCalendar
#AdventCalendar
December 24, 2024 at 8:00 PM
🎄 Day #12: Dazzling Displays!
For the final day, we added a 16x2 LCD (with an I2C backpack), brought back our RGB dot strand and temperature sensor. We displayed the current environment data and had the program pick colours for the strand.
#MakerAdventCalendar
#AdventCalendar
For the final day, we added a 16x2 LCD (with an I2C backpack), brought back our RGB dot strand and temperature sensor. We displayed the current environment data and had the program pick colours for the strand.
#MakerAdventCalendar
#AdventCalendar
🎄 Day #11: Merry Membrane!
Today, we added a 4-way membrane keypad to our build. We used the buttons as a colour pattern selector and a passcode input for a secret present list.
#MakerAdventCalendar
#AdventCalendar
Today, we added a 4-way membrane keypad to our build. We used the buttons as a colour pattern selector and a passcode input for a secret present list.
#MakerAdventCalendar
#AdventCalendar
December 23, 2024 at 10:30 PM
🎄 Day #11: Merry Membrane!
Today, we added a 4-way membrane keypad to our build. We used the buttons as a colour pattern selector and a passcode input for a secret present list.
#MakerAdventCalendar
#AdventCalendar
Today, we added a 4-way membrane keypad to our build. We used the buttons as a colour pattern selector and a passcode input for a secret present list.
#MakerAdventCalendar
#AdventCalendar
🎄 Day #10: ULTRA Blinky!
Today, we added a 15-LED RGB dot strand and brought back the Slide Potentiometer from Day 7. We ran some cool effects Including flashing alternate odd/even LEDs between red and green.
#MakerAdventCalendar
#AdventCalendar
Today, we added a 15-LED RGB dot strand and brought back the Slide Potentiometer from Day 7. We ran some cool effects Including flashing alternate odd/even LEDs between red and green.
#MakerAdventCalendar
#AdventCalendar
December 22, 2024 at 10:00 PM
🎄 Day #10: ULTRA Blinky!
Today, we added a 15-LED RGB dot strand and brought back the Slide Potentiometer from Day 7. We ran some cool effects Including flashing alternate odd/even LEDs between red and green.
#MakerAdventCalendar
#AdventCalendar
Today, we added a 15-LED RGB dot strand and brought back the Slide Potentiometer from Day 7. We ran some cool effects Including flashing alternate odd/even LEDs between red and green.
#MakerAdventCalendar
#AdventCalendar
🎄 Day #9: Ice Cold Coding!
Today, we added a DHT20/AHT20 temperature and humidity sensor, obtained the readings, and displayed the temperature using the LED ring from yesterday.
#MakerAdventCalendar
#AdventCalendar
Today, we added a DHT20/AHT20 temperature and humidity sensor, obtained the readings, and displayed the temperature using the LED ring from yesterday.
#MakerAdventCalendar
#AdventCalendar
December 18, 2024 at 8:30 PM
🎄 Day #9: Ice Cold Coding!
Today, we added a DHT20/AHT20 temperature and humidity sensor, obtained the readings, and displayed the temperature using the LED ring from yesterday.
#MakerAdventCalendar
#AdventCalendar
Today, we added a DHT20/AHT20 temperature and humidity sensor, obtained the readings, and displayed the temperature using the LED ring from yesterday.
#MakerAdventCalendar
#AdventCalendar
🎄 Day #8: Rainbow Ring!
Today, we added a ring of 12 RGB addressable LEDs. Activities included light chasing, spinning lights, bouncing lights, and random colours.
#MakerAdventCalendar
#AdventCalendar
Today, we added a ring of 12 RGB addressable LEDs. Activities included light chasing, spinning lights, bouncing lights, and random colours.
#MakerAdventCalendar
#AdventCalendar
December 17, 2024 at 10:00 PM
🎄 Day #8: Rainbow Ring!
Today, we added a ring of 12 RGB addressable LEDs. Activities included light chasing, spinning lights, bouncing lights, and random colours.
#MakerAdventCalendar
#AdventCalendar
Today, we added a ring of 12 RGB addressable LEDs. Activities included light chasing, spinning lights, bouncing lights, and random colours.
#MakerAdventCalendar
#AdventCalendar
🎄 Day #7: Time to Slide!
Today, we added a slide potentiometer “slider” to the build. We changed the LED colours, fades, and flash speed. We used the ADC pins on the Pico to turn the signal coming from the slider into digital.
#MakerAdventCalendar
#AdventCalendar
Today, we added a slide potentiometer “slider” to the build. We changed the LED colours, fades, and flash speed. We used the ADC pins on the Pico to turn the signal coming from the slider into digital.
#MakerAdventCalendar
#AdventCalendar
December 15, 2024 at 10:00 PM
🎄 Day #7: Time to Slide!
Today, we added a slide potentiometer “slider” to the build. We changed the LED colours, fades, and flash speed. We used the ADC pins on the Pico to turn the signal coming from the slider into digital.
#MakerAdventCalendar
#AdventCalendar
Today, we added a slide potentiometer “slider” to the build. We changed the LED colours, fades, and flash speed. We used the ADC pins on the Pico to turn the signal coming from the slider into digital.
#MakerAdventCalendar
#AdventCalendar
🎄 Day #6: See the RGB!
Today, we reset the breadboard and added two addressable RGB LEDs. Creating loops in code to cycle the colours, add in fades, and pass the colour between the two LEDs.
#MakerAdventCalendar
#AdventCalendar
Today, we reset the breadboard and added two addressable RGB LEDs. Creating loops in code to cycle the colours, add in fades, and pass the colour between the two LEDs.
#MakerAdventCalendar
#AdventCalendar
December 13, 2024 at 9:00 PM
🎄 Day #6: See the RGB!
Today, we reset the breadboard and added two addressable RGB LEDs. Creating loops in code to cycle the colours, add in fades, and pass the colour between the two LEDs.
#MakerAdventCalendar
#AdventCalendar
Today, we reset the breadboard and added two addressable RGB LEDs. Creating loops in code to cycle the colours, add in fades, and pass the colour between the two LEDs.
#MakerAdventCalendar
#AdventCalendar
🎄 Day #5: Switch the DIP!
Today, we added a “rat’s nest” of jumper wires and a 5-way DIP switch. We can now physically turn each LED on and off individually. Also, using functions we can run little programs for each DIP switch.
#MakerAdventCalendar
#AdventCalendar
Today, we added a “rat’s nest” of jumper wires and a 5-way DIP switch. We can now physically turn each LED on and off individually. Also, using functions we can run little programs for each DIP switch.
#MakerAdventCalendar
#AdventCalendar
December 11, 2024 at 8:30 PM
🎄 Day #5: Switch the DIP!
Today, we added a “rat’s nest” of jumper wires and a 5-way DIP switch. We can now physically turn each LED on and off individually. Also, using functions we can run little programs for each DIP switch.
#MakerAdventCalendar
#AdventCalendar
Today, we added a “rat’s nest” of jumper wires and a 5-way DIP switch. We can now physically turn each LED on and off individually. Also, using functions we can run little programs for each DIP switch.
#MakerAdventCalendar
#AdventCalendar
🎄 Day #4: Brilliant Bar Graphs!
Today, we added a 5-segment bar graph to our build. Three code blocks were tested - an LED scanner like Knight Rider, random LEDs, and a counter using our button circuit from day three.
#MakerAdventCalendar
#AdventCalendar
Today, we added a 5-segment bar graph to our build. Three code blocks were tested - an LED scanner like Knight Rider, random LEDs, and a counter using our button circuit from day three.
#MakerAdventCalendar
#AdventCalendar
December 9, 2024 at 9:00 PM
🎄 Day #4: Brilliant Bar Graphs!
Today, we added a 5-segment bar graph to our build. Three code blocks were tested - an LED scanner like Knight Rider, random LEDs, and a counter using our button circuit from day three.
#MakerAdventCalendar
#AdventCalendar
Today, we added a 5-segment bar graph to our build. Three code blocks were tested - an LED scanner like Knight Rider, random LEDs, and a counter using our button circuit from day three.
#MakerAdventCalendar
#AdventCalendar
🎄 Day #3: Incredible Inputs!
Today, we wired a button circuit into our build. Controlled the LED block with the buttons and counted up and down depending on which button was pressed.
#MakerAdventCalendar
#AdventCalendar
Today, we wired a button circuit into our build. Controlled the LED block with the buttons and counted up and down depending on which button was pressed.
#MakerAdventCalendar
#AdventCalendar
December 6, 2024 at 10:00 PM
🎄 Day #3: Incredible Inputs!
Today, we wired a button circuit into our build. Controlled the LED block with the buttons and counted up and down depending on which button was pressed.
#MakerAdventCalendar
#AdventCalendar
Today, we wired a button circuit into our build. Controlled the LED block with the buttons and counted up and down depending on which button was pressed.
#MakerAdventCalendar
#AdventCalendar
🎄 Day #2: Lighting LEDs!
Today, we wrote a little program to turn on the Pico’s onboard Green LED. The code also flashes the Red LED block ten times, waiting half a second between each flash.
#MakerAdventCalendar
#AdventCalendar
Today, we wrote a little program to turn on the Pico’s onboard Green LED. The code also flashes the Red LED block ten times, waiting half a second between each flash.
#MakerAdventCalendar
#AdventCalendar
December 4, 2024 at 9:00 PM
🎄 Day #2: Lighting LEDs!
Today, we wrote a little program to turn on the Pico’s onboard Green LED. The code also flashes the Red LED block ten times, waiting half a second between each flash.
#MakerAdventCalendar
#AdventCalendar
Today, we wrote a little program to turn on the Pico’s onboard Green LED. The code also flashes the Red LED block ten times, waiting half a second between each flash.
#MakerAdventCalendar
#AdventCalendar