Alex
@devopslimeyninja.bsky.social
Technology nerd, DevOps and Platform Engineering ninja, maker of things, aerospace and science fiction fan. Los Alamos National Laboratory. Opinions my own.
✅ upgrade complete.
November 10, 2025 at 4:35 AM
✅ upgrade complete.
Looks great! Routing keyboard pcbs is one of my favorite things to do!
November 8, 2025 at 4:54 PM
Looks great! Routing keyboard pcbs is one of my favorite things to do!
Wasn’t that on a cover of The Micro User, Acorn User, or one of those?
November 1, 2025 at 3:12 PM
Wasn’t that on a cover of The Micro User, Acorn User, or one of those?
Right tool for the job, right?
I got into Tarn-X for cases like this. Not a great picture of the Z80 in the socket, but you can kinda see how all the legs are super oxidized from the CRT goop. And then after 10s of treatment (taken just now).
I got into Tarn-X for cases like this. Not a great picture of the Z80 in the socket, but you can kinda see how all the legs are super oxidized from the CRT goop. And then after 10s of treatment (taken just now).
October 31, 2025 at 2:37 AM
Right tool for the job, right?
I got into Tarn-X for cases like this. Not a great picture of the Z80 in the socket, but you can kinda see how all the legs are super oxidized from the CRT goop. And then after 10s of treatment (taken just now).
I got into Tarn-X for cases like this. Not a great picture of the Z80 in the socket, but you can kinda see how all the legs are super oxidized from the CRT goop. And then after 10s of treatment (taken just now).
yep - definitely have to wash tarn-x off, and don't leave anything soaking in there for long. Nokorode looks hardcore, will check it out!!
October 31, 2025 at 2:15 AM
yep - definitely have to wash tarn-x off, and don't leave anything soaking in there for long. Nokorode looks hardcore, will check it out!!
...and I knew I'd seen those keycaps somewhere before!
October 31, 2025 at 2:07 AM
...and I knew I'd seen those keycaps somewhere before!
This time, I decided to try sous-vide method. Liquid Salon 20 in the freezer bag, run at 50C for about six hours. I also added a UV flood light and metal foil wrap just to be sure.
October 31, 2025 at 2:02 AM
This time, I decided to try sous-vide method. Liquid Salon 20 in the freezer bag, run at 50C for about six hours. I also added a UV flood light and metal foil wrap just to be sure.
Comparing keyboard before and after retrobrite
October 31, 2025 at 1:59 AM
Comparing keyboard before and after retrobrite
It’s awesome. Dip and agitate for a few seconds and then a thorough rinse with water. Let me know how you get on @jeriellsworth.bsky.social
October 30, 2025 at 8:25 PM
It’s awesome. Dip and agitate for a few seconds and then a thorough rinse with water. Let me know how you get on @jeriellsworth.bsky.social
I removed two of the ICs on the other path, all good there.
October 30, 2025 at 8:21 PM
I removed two of the ICs on the other path, all good there.
The other two ICs on that path were also affected pretty badly, but cleaned up great. I needed to use some odorless mineral spirits to remove the last of the stubborn goop. Tarn-X helped clean up the IC pins once more.
October 30, 2025 at 8:17 PM
The other two ICs on that path were also affected pretty badly, but cleaned up great. I needed to use some odorless mineral spirits to remove the last of the stubborn goop. Tarn-X helped clean up the IC pins once more.
No surprise that the Z80 socket didn’t fair so well, but it cleaned up just fine. The CPU itself took a dip in Tarn-X that cleaned up corrosion on the pins.
October 30, 2025 at 8:11 PM
No surprise that the Z80 socket didn’t fair so well, but it cleaned up just fine. The CPU itself took a dip in Tarn-X that cleaned up corrosion on the pins.
The CRT river of doom took two paths through the ICs.
October 30, 2025 at 8:08 PM
The CRT river of doom took two paths through the ICs.
What’s next, @jeriellsworth.bsky.social?
October 22, 2025 at 3:42 PM
What’s next, @jeriellsworth.bsky.social?