nulleric
@eric.scsi.blue
Creator of @bluescsi.com, retro enthusiast, software developer.
Follow me on Mastodon too:
https://mastodon.social/@nulleric
https://hachyderm.io/@BlueSCSI
Follow me on Mastodon too:
https://mastodon.social/@nulleric
https://hachyderm.io/@BlueSCSI
People usually just called it what others said and there was no internet to tell you that you were using the wrong words.
January 12, 2026 at 4:47 PM
People usually just called it what others said and there was no internet to tell you that you were using the wrong words.
I’m not at a computer but just need to wire up the gpio to the i2c buttons. Have to pull up kicad or look at the defines for which ones they are on the bluescsi. Also which hardware rev of db25 as the older one has them exposed on the board github.com/BlueSCSI/Blu...
Buttons
Open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350 - BlueSCSI/BlueSCSI-v2
github.com
December 23, 2025 at 9:17 PM
I’m not at a computer but just need to wire up the gpio to the i2c buttons. Have to pull up kicad or look at the defines for which ones they are on the bluescsi. Also which hardware rev of db25 as the older one has them exposed on the board github.com/BlueSCSI/Blu...
Installing a 50p internally & want to be extra cautious you should. I'm comfortable moving around with the back off and install a HDD, but not everyone is for sure and thats ok. Good things to consider are a mount to access the SD card from the front, or a BlueSCSI DB25 that plugs in the back
December 15, 2025 at 3:07 PM
Installing a 50p internally & want to be extra cautious you should. I'm comfortable moving around with the back off and install a HDD, but not everyone is for sure and thats ok. Good things to consider are a mount to access the SD card from the front, or a BlueSCSI DB25 that plugs in the back