@georgiasmg.bsky.social
Reposted
Working on a playing card version of Toppa (possibly).
I like the idea of offering a low cost alternative but also wouldn't want to cannibalize the small amount of game sales I do have for the board versions. #cardgame #gamedesign #tabletop
I like the idea of offering a low cost alternative but also wouldn't want to cannibalize the small amount of game sales I do have for the board versions. #cardgame #gamedesign #tabletop
September 30, 2025 at 12:43 PM
Working on a playing card version of Toppa (possibly).
I like the idea of offering a low cost alternative but also wouldn't want to cannibalize the small amount of game sales I do have for the board versions. #cardgame #gamedesign #tabletop
I like the idea of offering a low cost alternative but also wouldn't want to cannibalize the small amount of game sales I do have for the board versions. #cardgame #gamedesign #tabletop
Reposted
Not entirely glue-less unfortunately. The top and bottom panels still need to be glued in to stay but I will fix that eventually.
September 30, 2025 at 4:55 PM
Not entirely glue-less unfortunately. The top and bottom panels still need to be glued in to stay but I will fix that eventually.
Reposted
Progress on the new matching card game. Still thinking on names. I like "ICON: A Game of Pairs" but I think there's a game named Icon already? I could go with just "A Game of Pairs" maybe? Names are hard, lol.
Digging the UNO color vibe though! #gamedesign #tabletop
Digging the UNO color vibe though! #gamedesign #tabletop
September 24, 2025 at 2:40 PM
Progress on the new matching card game. Still thinking on names. I like "ICON: A Game of Pairs" but I think there's a game named Icon already? I could go with just "A Game of Pairs" maybe? Names are hard, lol.
Digging the UNO color vibe though! #gamedesign #tabletop
Digging the UNO color vibe though! #gamedesign #tabletop
Reposted
TOPPA DAILY - 9/7/2025 - Turns: 7
Play here: markgonyea.com/toppadaily
Play here: markgonyea.com/toppadaily
ToppaDaily — Mark Gonyea
markgonyea.com
September 7, 2025 at 12:35 PM
TOPPA DAILY - 9/7/2025 - Turns: 7
Play here: markgonyea.com/toppadaily
Play here: markgonyea.com/toppadaily
Reposted
Easy one today! Give it a try!!!
TOPPA DAILY - 9/6/2025 - Turns: 5
Play here: markgonyea.com/toppadaily
TOPPA DAILY - 9/6/2025 - Turns: 5
Play here: markgonyea.com/toppadaily
markgonyea.com
September 6, 2025 at 2:31 PM
Easy one today! Give it a try!!!
TOPPA DAILY - 9/6/2025 - Turns: 5
Play here: markgonyea.com/toppadaily
TOPPA DAILY - 9/6/2025 - Turns: 5
Play here: markgonyea.com/toppadaily
Reposted
Reposted
Just dropped off 20 of my Vermont mountains magnet to a local shop! Hopefully the first of many. : )
July 10, 2025 at 5:28 PM
Just dropped off 20 of my Vermont mountains magnet to a local shop! Hopefully the first of many. : )
Reposted
I can get 28 Toppa boards from 1 full spool of PLA on my Bambu A1 Mini. About 35g each. I could probably make the walls a bit thinner but I like that it feels solid & 14 sets of boards from a single spool is good enough for me! #3dprinting #tabletopgames #gamedesign
July 5, 2025 at 11:13 PM
I can get 28 Toppa boards from 1 full spool of PLA on my Bambu A1 Mini. About 35g each. I could probably make the walls a bit thinner but I like that it feels solid & 14 sets of boards from a single spool is good enough for me! #3dprinting #tabletopgames #gamedesign
Reposted
Toppa takes about 7-8 hours to print a full game.
Block Market takes about 9-10 hours for a game (it's got the most pieces & 7 colors!
Gravity Well is the fastest, it only takes about 5 hours.
Hopefully if I sell some games I'll buy a 2nd Bambu Mini & double my production! lol.
Block Market takes about 9-10 hours for a game (it's got the most pieces & 7 colors!
Gravity Well is the fastest, it only takes about 5 hours.
Hopefully if I sell some games I'll buy a 2nd Bambu Mini & double my production! lol.
June 21, 2025 at 2:05 PM
Toppa takes about 7-8 hours to print a full game.
Block Market takes about 9-10 hours for a game (it's got the most pieces & 7 colors!
Gravity Well is the fastest, it only takes about 5 hours.
Hopefully if I sell some games I'll buy a 2nd Bambu Mini & double my production! lol.
Block Market takes about 9-10 hours for a game (it's got the most pieces & 7 colors!
Gravity Well is the fastest, it only takes about 5 hours.
Hopefully if I sell some games I'll buy a 2nd Bambu Mini & double my production! lol.
Reposted
This is what about 2 weeks of off & on printing looks like when you only have a single Bambu A1 Mini (plus a few prototypes game boards). #tabletop #games #3dprinting
I have a few of each game available on my Etsy shop w/free shipping in the U.S.
www.etsy.com/shop/ToppaGa...
I have a few of each game available on my Etsy shop w/free shipping in the U.S.
www.etsy.com/shop/ToppaGa...
June 21, 2025 at 2:00 PM
This is what about 2 weeks of off & on printing looks like when you only have a single Bambu A1 Mini (plus a few prototypes game boards). #tabletop #games #3dprinting
I have a few of each game available on my Etsy shop w/free shipping in the U.S.
www.etsy.com/shop/ToppaGa...
I have a few of each game available on my Etsy shop w/free shipping in the U.S.
www.etsy.com/shop/ToppaGa...
Reposted
I reworked my Block Market game so instead of printing a set of 24 paper "Investment Cards" for each game I'm 3d printing my own "Tiles" that will do the same thing as the cards.
Adds a LOT to the print time but fits the theme so much better & I kind of love it all looks. #tabletop #gamedesign
Adds a LOT to the print time but fits the theme so much better & I kind of love it all looks. #tabletop #gamedesign
June 21, 2025 at 2:18 PM
I reworked my Block Market game so instead of printing a set of 24 paper "Investment Cards" for each game I'm 3d printing my own "Tiles" that will do the same thing as the cards.
Adds a LOT to the print time but fits the theme so much better & I kind of love it all looks. #tabletop #gamedesign
Adds a LOT to the print time but fits the theme so much better & I kind of love it all looks. #tabletop #gamedesign
Reposted
Reworked my packaging yet again to a less costly plastic box. I really like being able to actually see game pieces/boards inside.
I can now sell games for $20 at shows & $29 with free shipping online. A price point I honestly never thought I'd hit!
#tabletopgames #boardgames #3dprintedgames
I can now sell games for $20 at shows & $29 with free shipping online. A price point I honestly never thought I'd hit!
#tabletopgames #boardgames #3dprintedgames
June 10, 2025 at 4:29 PM
Reworked my packaging yet again to a less costly plastic box. I really like being able to actually see game pieces/boards inside.
I can now sell games for $20 at shows & $29 with free shipping online. A price point I honestly never thought I'd hit!
#tabletopgames #boardgames #3dprintedgames
I can now sell games for $20 at shows & $29 with free shipping online. A price point I honestly never thought I'd hit!
#tabletopgames #boardgames #3dprintedgames
Reposted
Love how your mind works on things behind your back. Set aside vague concept months ago as I worked on finishing other games.
Back to it the other day & pretty much knew what it needed to be.
Also, if only 1 board in game do you prefer grey or purple?
#tabletop #gamedesign
Back to it the other day & pretty much knew what it needed to be.
Also, if only 1 board in game do you prefer grey or purple?
#tabletop #gamedesign
June 4, 2025 at 10:00 PM
Love how your mind works on things behind your back. Set aside vague concept months ago as I worked on finishing other games.
Back to it the other day & pretty much knew what it needed to be.
Also, if only 1 board in game do you prefer grey or purple?
#tabletop #gamedesign
Back to it the other day & pretty much knew what it needed to be.
Also, if only 1 board in game do you prefer grey or purple?
#tabletop #gamedesign
Reposted
Added Block Market to my shop. This is my 3rd game, along with Toppa & Gravity Well that were started over the covid pandemic. Great to see all 3 completed & available. Time to start the next round of Toppa Games, I may have a couple concepts brewing. #boardgames #tabletop #gamedesign
June 3, 2025 at 7:39 PM
Added Block Market to my shop. This is my 3rd game, along with Toppa & Gravity Well that were started over the covid pandemic. Great to see all 3 completed & available. Time to start the next round of Toppa Games, I may have a couple concepts brewing. #boardgames #tabletop #gamedesign
Reposted
Spent today adding a couple new STL 3D files to my Etsy shop. These are only a few bucks each but I think I’m going to try listing some small stuff I’ve designed that I don’t mind selling for a dollar or so. See if that brings in more eyes. #3dprinting #etsy
toppagames.etsy.com
toppagames.etsy.com
May 15, 2025 at 7:07 PM
Spent today adding a couple new STL 3D files to my Etsy shop. These are only a few bucks each but I think I’m going to try listing some small stuff I’ve designed that I don’t mind selling for a dollar or so. See if that brings in more eyes. #3dprinting #etsy
toppagames.etsy.com
toppagames.etsy.com
Reposted
The board for one of the games I’m working on. Pretty much only the rules booklets design left to do. Looking forward to putting it out there! #tabletop #boardgames #3dprinting
May 15, 2025 at 7:11 PM
The board for one of the games I’m working on. Pretty much only the rules booklets design left to do. Looking forward to putting it out there! #tabletop #boardgames #3dprinting
Reposted
Somehow I always end up back at the beginning. When I first created Toppa I made it myself on my laser cutter. Now after a lot of experimenting with different packaging solutions for the 3d printed version I'm back to making my own boxes on my laser cutter. #tabletop #boardgames
May 13, 2025 at 12:45 AM
Somehow I always end up back at the beginning. When I first created Toppa I made it myself on my laser cutter. Now after a lot of experimenting with different packaging solutions for the 3d printed version I'm back to making my own boxes on my laser cutter. #tabletop #boardgames
Reposted
I’m really pleased with this 2 piece stackable, snap-together checker design I made. Specifically for Toppa but I’m sure I’ll be using them in future games as well. #3dprinting #boardgames
May 9, 2025 at 9:39 PM
I’m really pleased with this 2 piece stackable, snap-together checker design I made. Specifically for Toppa but I’m sure I’ll be using them in future games as well. #3dprinting #boardgames
Reposted
Except for the color chips this is all “wood Filament”. I doubt there’s a ton of wood in it but it does give a more rough, matte finish to things.
May 6, 2025 at 9:25 PM
Except for the color chips this is all “wood Filament”. I doubt there’s a ton of wood in it but it does give a more rough, matte finish to things.
Reposted
This is the fully 3d printed version of my Toppa game. I like it! Still not as much as the real wood version but it’s about 40% of the cost to make. Still takes about 7 hours to print a complete set of all the pieces (2 boards, 24 checkers, 18 chips).
#3dprinting #tabletop #games
#3dprinting #tabletop #games
May 6, 2025 at 9:22 PM
This is the fully 3d printed version of my Toppa game. I like it! Still not as much as the real wood version but it’s about 40% of the cost to make. Still takes about 7 hours to print a complete set of all the pieces (2 boards, 24 checkers, 18 chips).
#3dprinting #tabletop #games
#3dprinting #tabletop #games
Reposted
I still like wood boards & checkers more but the cost of 3d printed Toppa is literally a third of wood. Brings the retail cost of a game down to $20 from $35 and that’s super hard to ignore.
I DO like the new icons on the color chips. Helps with color blindness access too.
#tabletop #3dprinting
I DO like the new icons on the color chips. Helps with color blindness access too.
#tabletop #3dprinting
April 22, 2025 at 1:43 PM
I still like wood boards & checkers more but the cost of 3d printed Toppa is literally a third of wood. Brings the retail cost of a game down to $20 from $35 and that’s super hard to ignore.
I DO like the new icons on the color chips. Helps with color blindness access too.
#tabletop #3dprinting
I DO like the new icons on the color chips. Helps with color blindness access too.
#tabletop #3dprinting
Reposted
Played with making little 1x1x1 cube table sign holders today.
There’s a lot of this kind of thing out there so probably can’t compete in pricing but maybe something for my own signs at shows eventually.
#3dprinting
There’s a lot of this kind of thing out there so probably can’t compete in pricing but maybe something for my own signs at shows eventually.
#3dprinting
April 15, 2025 at 7:43 PM
Played with making little 1x1x1 cube table sign holders today.
There’s a lot of this kind of thing out there so probably can’t compete in pricing but maybe something for my own signs at shows eventually.
#3dprinting
There’s a lot of this kind of thing out there so probably can’t compete in pricing but maybe something for my own signs at shows eventually.
#3dprinting
Reposted
I also did a version where the blocks are right next to each other. That helps a bit.
April 3, 2025 at 2:01 PM
I also did a version where the blocks are right next to each other. That helps a bit.
Reposted
I designed these maze cubes before finding a similar design on thingiverse.
The “holes” are more obvious than I was hoping they’d be and it’ll take a lot more blocks to make a really good maze.
Oh well, still good practice and it looks super cool!
#3dprinting #BambuA1mini
The “holes” are more obvious than I was hoping they’d be and it’ll take a lot more blocks to make a really good maze.
Oh well, still good practice and it looks super cool!
#3dprinting #BambuA1mini
April 3, 2025 at 2:00 PM
I designed these maze cubes before finding a similar design on thingiverse.
The “holes” are more obvious than I was hoping they’d be and it’ll take a lot more blocks to make a really good maze.
Oh well, still good practice and it looks super cool!
#3dprinting #BambuA1mini
The “holes” are more obvious than I was hoping they’d be and it’ll take a lot more blocks to make a really good maze.
Oh well, still good practice and it looks super cool!
#3dprinting #BambuA1mini
Reposted
A few original 3d designs. Almost time to buy a couple new filament colors now that I k ow the machine works.
These are 2” diameter and 1/8” thick. Using a .4 nozzle. Definitely see some printing lines but overall I’m pretty happy with the quality. #3dprinting
These are 2” diameter and 1/8” thick. Using a .4 nozzle. Definitely see some printing lines but overall I’m pretty happy with the quality. #3dprinting
March 31, 2025 at 12:44 AM
A few original 3d designs. Almost time to buy a couple new filament colors now that I k ow the machine works.
These are 2” diameter and 1/8” thick. Using a .4 nozzle. Definitely see some printing lines but overall I’m pretty happy with the quality. #3dprinting
These are 2” diameter and 1/8” thick. Using a .4 nozzle. Definitely see some printing lines but overall I’m pretty happy with the quality. #3dprinting