@mssober.bsky.social
@diannarussini.bsky.social difference
Would be the end of the barrel would be smaller on the torpedo bat. It actually narrows the sweet spot.
I hope this is useful.
I love your work.
Would be the end of the barrel would be smaller on the torpedo bat. It actually narrows the sweet spot.
I hope this is useful.
I love your work.
April 1, 2025 at 4:28 PM
@diannarussini.bsky.social difference
Would be the end of the barrel would be smaller on the torpedo bat. It actually narrows the sweet spot.
I hope this is useful.
I love your work.
Would be the end of the barrel would be smaller on the torpedo bat. It actually narrows the sweet spot.
I hope this is useful.
I love your work.
@diannarussini.bsky.social
But the sweet spot actually shrunk down to the small area that is 2.61
All in all it lets the bat company use heavier billets to start with then sand weight off the barrel to achieve a -3 and more balanced. If you but the 2 bats side by side the only
But the sweet spot actually shrunk down to the small area that is 2.61
All in all it lets the bat company use heavier billets to start with then sand weight off the barrel to achieve a -3 and more balanced. If you but the 2 bats side by side the only
April 1, 2025 at 4:26 PM
@diannarussini.bsky.social
But the sweet spot actually shrunk down to the small area that is 2.61
All in all it lets the bat company use heavier billets to start with then sand weight off the barrel to achieve a -3 and more balanced. If you but the 2 bats side by side the only
But the sweet spot actually shrunk down to the small area that is 2.61
All in all it lets the bat company use heavier billets to start with then sand weight off the barrel to achieve a -3 and more balanced. If you but the 2 bats side by side the only
@diannarussini.bsky.social
Like the 271 model.
Then they are sanding down the end of the barrel from 2.61 to some where around 2.50 .
2.62 is the max barrel diameter always has been. By sanding the end of the barrel it is making the bat lighter on the end so it should feel more balanced.
Like the 271 model.
Then they are sanding down the end of the barrel from 2.61 to some where around 2.50 .
2.62 is the max barrel diameter always has been. By sanding the end of the barrel it is making the bat lighter on the end so it should feel more balanced.
April 1, 2025 at 4:21 PM
@diannarussini.bsky.social
Like the 271 model.
Then they are sanding down the end of the barrel from 2.61 to some where around 2.50 .
2.62 is the max barrel diameter always has been. By sanding the end of the barrel it is making the bat lighter on the end so it should feel more balanced.
Like the 271 model.
Then they are sanding down the end of the barrel from 2.61 to some where around 2.50 .
2.62 is the max barrel diameter always has been. By sanding the end of the barrel it is making the bat lighter on the end so it should feel more balanced.
@diannarussini.bsky.social
I want to let you know, I made pro bats for many years. Back when they mandated ink dots on the handle to measure how straight the grain ran.
The torpedo bat is simply a 243 model With a 2.61 barrel. Legal, and move the taper down towards the knob a little,
I want to let you know, I made pro bats for many years. Back when they mandated ink dots on the handle to measure how straight the grain ran.
The torpedo bat is simply a 243 model With a 2.61 barrel. Legal, and move the taper down towards the knob a little,
April 1, 2025 at 4:16 PM
@diannarussini.bsky.social
I want to let you know, I made pro bats for many years. Back when they mandated ink dots on the handle to measure how straight the grain ran.
The torpedo bat is simply a 243 model With a 2.61 barrel. Legal, and move the taper down towards the knob a little,
I want to let you know, I made pro bats for many years. Back when they mandated ink dots on the handle to measure how straight the grain ran.
The torpedo bat is simply a 243 model With a 2.61 barrel. Legal, and move the taper down towards the knob a little,
Reposted
I’m going to put my rich guy hat on and say I hope that Mexico and Canada issue equal, retaliatory tariffs and stick to them for an extended period.
I apologize to all the people it will cost money and the businesses it will hurt.
But it’s the only way for tariffs to be seen for what they are
I apologize to all the people it will cost money and the businesses it will hurt.
But it’s the only way for tariffs to be seen for what they are
February 2, 2025 at 12:02 AM
I’m going to put my rich guy hat on and say I hope that Mexico and Canada issue equal, retaliatory tariffs and stick to them for an extended period.
I apologize to all the people it will cost money and the businesses it will hurt.
But it’s the only way for tariffs to be seen for what they are
I apologize to all the people it will cost money and the businesses it will hurt.
But it’s the only way for tariffs to be seen for what they are
Reposted
Horrific
BREAKING: UnitedHealthcare CEO reportedly killed in shooting www.statnews.com/2024/12/04/u...
UnitedHealthcare CEO Brian Thompson is reportedly killed in shooting
UnitedHealth Group executives were in New York City on Wednesday for their annual investor conference, which was abruptly canceled.
www.statnews.com
December 4, 2024 at 2:42 PM
Horrific
Reposted
I'm tired of Donald Trump and he hasn't even taken office yet.
December 3, 2024 at 8:27 PM
I'm tired of Donald Trump and he hasn't even taken office yet.
Reposted
I don't think our problem is merely with messaging. Democrats need to walk the walk. All elected Democrats need to stop taking money from the very wealthy and corporations. They need to focus on the working class and serve their needs. That is where the votes are.
December 1, 2024 at 12:09 AM
I don't think our problem is merely with messaging. Democrats need to walk the walk. All elected Democrats need to stop taking money from the very wealthy and corporations. They need to focus on the working class and serve their needs. That is where the votes are.
Reposted
This must be condemned by everyone.
November 29, 2024 at 6:29 PM
This must be condemned by everyone.
Reposted
So when are we going to start talking about all these companies who stayed quiet during the election and are now begging Donald Trump not to impose tariffs?
November 26, 2024 at 7:18 PM
So when are we going to start talking about all these companies who stayed quiet during the election and are now begging Donald Trump not to impose tariffs?
Reposted
So let me get this straight.
If you apply for a job at a grocery store, you have to undergo a background check.
But, if you apply to be Director of National Intelligence, you don't?
Got it.
If you apply for a job at a grocery store, you have to undergo a background check.
But, if you apply to be Director of National Intelligence, you don't?
Got it.
November 25, 2024 at 9:59 PM
So let me get this straight.
If you apply for a job at a grocery store, you have to undergo a background check.
But, if you apply to be Director of National Intelligence, you don't?
Got it.
If you apply for a job at a grocery store, you have to undergo a background check.
But, if you apply to be Director of National Intelligence, you don't?
Got it.