With AI buying up the worldwide supply of DRAM and hard drives, a wide swath of industries from automotive to cellular to PCs will face Armageddon times.

My Nüborn Baby arrived in October, and now that I've had a few months to get used to it, I thought I'd write up a review, in case you were thinking of getting one for yourself.

The Pareto principle, also known as the 80/20 rule, states that for many outcomes, roughly 80% of consequences come from 20% of causes. The pursuit of getting the last 20% right is the reason that both ManT1S and ManT1S-Bridge are already on revision five before they are even released!

Computing, power, and communications over Single Pair Ethernet

One of the comments that tend to pop up about ManT1S is: "Why resurrect 10 Mbit/s networking, when we now have multi-gigabit alternatives?" Some people like to oversimplify complex engineering decisions to "just go with the highest number" or "I'll settle for nothing but the best", where "the best" invariably is defined as some high specification number in one single dimension. While that's the kind of story marketing departments may like to push, engineering requires a different approach...

Thank you all for your continued support! The ManT1S campaign is now over 300% funded! :) In this update I wanted to show some of the features of the preinstalled MicroPython firmware to make your life easier, and the differences in use depending on whether you are using a ManT1S-Bridge or not.

In this update I want to explore a few off-beat use cases for the ManT1S and ManT1S-Bridge. I would imagine that most use cases would involve a few ManT1S boards and a ManT1S-Bridge forming a distributed system, but this surely doesn't need to be the case. Both the ManT1S and ManT1S-Bridge have some great features that make them useful in their own right!

One thing that may be confusing about T1S is that you can't really go to the store and buy a "T1S cable". For standard Ethernet, on the other hand, it's easy to find pre-made Cat5e or Cat6 cables, or to crimp a couple of RJ45's on a length of cable yourself. Luckily, it turns out that the solution is quite simple, and T1S is very forgiving when it comes to the wiring it can work with!

Silicognition ManT1S is an ESP32 board with a 4-pole terminal block for T1S single-pair Ethernet (SPE) communication and daisy-chaining, as well as unpopulated headers for GPIOs and programming, and a Qwicc connector for I2C expansion. The IEEE 802.3cg 10BASE-T1S networking standard enables engineers and users to easily network and distribute power to up to eight T1S nodes over a single pair of wires, which makes it suitable for robotics, industrial/home automation, and other projects that benefit from a reduction in the number of cables and associated weight. The company also designed the ManT1S Bridge to interface a standard Ethernet RJ45 to a single-pair T1S mixing segment. ManT1S specifications: System-in-Package – ESP32-PICO-V3-O2 SoC – ESP32 CPU – Xtensa dual-core 32-bit LX6 microprocessor up to 240 MHz Memory – 520B SRAM Storage – 448 KB ROM Wireless – WiFi 4 and Bluetooth 4.2/5.x Memory – 2 MB PSRAM Storage – 8 MB [...] The post Silicognition ManT1S ESP32 board supports T1S single-pair Ethernet for robotics and automation (Crowdfunding) appeared first on CNX Software - Embedded Systems News.

In this update, I cover endpoint termination in T1S mixing segments and announce the ManT1S-Gadget, which will ship as a freebie along with each ManT1S Starter Kit.