E-ink shipping monitor The display comprises a Raspberry Pi Zero 2 W, a Pimoroni Inky Impression 7.3-inch display, and a Wegmatt dAISy Mini AIS receiver. AIS stands for ‘Automatic Identification...
Origin | Interest | Match
Origin | Interest | Match
E-ink shipping monitor — Raspberry Pi Official Magazine
The display comprises a Raspberry Pi Zero 2 W, a Pimoroni Inky Impression 7.3-inch display, and a Wegmatt dAISy Mini AIS receiver. AIS stands for ‘Automatic Identification System’, and it’s this device that picks up the signals coming from the ships themselves, which goes to the display via the Raspberry Pi Zero 2 W. There’s probably a […]
magazine.raspberrypi.com
November 3, 2025 at 12:43 PM
I made a very rough tide clock using a BBC micro:bit and an eInk display. Updates every 5 minutes, battery-powered, fixed interval between tides of 6h 12m 30s, set by flashing code with the number of seconds between tides. Next steps: setting the tide remotely by radio! #microbit
October 4, 2025 at 2:56 PM
I made a very rough tide clock using a BBC micro:bit and an eInk display. Updates every 5 minutes, battery-powered, fixed interval between tides of 6h 12m 30s, set by flashing code with the number of seconds between tides. Next steps: setting the tide remotely by radio! #microbit
September 26, 2025 at 7:44 PM
And it's payday, Maker Gods please save me from the Pimoroni pirates, they after my maker funds!
20% off in store this weekend when you use code "CLICK" during checkout! (excludes Raspberry Pi computers and kits): shop.pimoroni.com
September 26, 2025 at 9:53 PM
And it's payday, Maker Gods please save me from the Pimoroni pirates, they after my maker funds!
I modified the world clock example of the Pimoroni Presto to give it some much needed Matrix. @pimoroni.com #micropython #RaspberryPiPico #Pimoroni
September 21, 2025 at 7:00 PM
I modified the world clock example of the Pimoroni Presto to give it some much needed Matrix. @pimoroni.com #micropython #RaspberryPiPico #Pimoroni
After some time, research, and a lot of reading schematics, along with many code examples in C/C++, Go, and Rust, I’ve finally managed to make the @pimoroni.com Tufty 2040 work with embassy-rs and embedded-graphics. It was full of challenges, especially because it uses a Parallel Bus instead of SPI.
September 17, 2025 at 6:08 AM
After some time, research, and a lot of reading schematics, along with many code examples in C/C++, Go, and Rust, I’ve finally managed to make the @pimoroni.com Tufty 2040 work with embassy-rs and embedded-graphics. It was full of challenges, especially because it uses a Parallel Bus instead of SPI.
Waveshare の電子ペーパーのサンプルコードと比べると Pimoroni の方はだいぶ真面目に書いてあるけど、それでも一部のコマンドが 16 進べた書きだったり「Not documented in datasheet」みたいなコメントがあったりして、電子ペーパー界隈はなんか全体的にドキュメントが頼りない感がある
September 12, 2025 at 11:03 PM
Waveshare の電子ペーパーのサンプルコードと比べると Pimoroni の方はだいぶ真面目に書いてあるけど、それでも一部のコマンドが 16 進べた書きだったり「Not documented in datasheet」みたいなコメントがあったりして、電子ペーパー界隈はなんか全体的にドキュメントが頼りない感がある
Nice! Good looking project! I’m doing something similar with Rust, e ink and a SCD40 but on the pico instead.
I think I may go the custom PCB route instead of a enclosure, kind of like the pimoroni inky frame
I think I may go the custom PCB route instead of a enclosure, kind of like the pimoroni inky frame
Inky Frame 4.0" (Pico W Aboard)
A compact Pico W powered E Ink® photo frame / home dashboard / life organiser with super concentrated seven colour display and wireless connectivity.
shop.pimoroni.com
December 7, 2024 at 2:16 PM
Nice! Good looking project! I’m doing something similar with Rust, e ink and a SCD40 but on the pico instead.
I think I may go the custom PCB route instead of a enclosure, kind of like the pimoroni inky frame
I think I may go the custom PCB route instead of a enclosure, kind of like the pimoroni inky frame
Switched to it from using apt to install arm gcc just over a year ago, and the speedup was immense - github.com/pimoroni/pim...
CI: Move some workflow steps into ci/micropython.sh by Gadgetoid · Pull Request #878 · pimoroni/pimoroni-pico
For a few reasons:
Reduce our dependency on GitHub actions workflows
Attempt to provide tools we can run locally to replicate a CI build
Make build steps more discoverable and less intertwined wit...
github.com
November 22, 2024 at 2:10 PM
Switched to it from using apt to install arm gcc just over a year ago, and the speedup was immense - github.com/pimoroni/pim...
It’s a Pimoroni weather station kit - wind speed, wind direction, rain gauge and a bunch of their sensors for air quality, temp, pressure and humidity
January 26, 2025 at 12:48 PM
It’s a Pimoroni weather station kit - wind speed, wind direction, rain gauge and a bunch of their sensors for air quality, temp, pressure and humidity
What do you do if it's rain outside? When was the last time you played real #arcade games like in the 80s? With a @Raspberry_Pi and a @pimoroni Picade X hat do you will always remember the good old days like playing games the whole day long in your favorite gaming hall.
November 12, 2023 at 9:36 PM
What do you do if it's rain outside? When was the last time you played real #arcade games like in the 80s? With a @Raspberry_Pi and a @pimoroni Picade X hat do you will always remember the good old days like playing games the whole day long in your favorite gaming hall.
My #yarrbooty order arrived! Very exited to have a play once I'm done with my current project (see bag making fabric currently covering my workspace 😅) @pimoroni.com
December 4, 2024 at 12:46 PM
My #yarrbooty order arrived! Very exited to have a play once I'm done with my current project (see bag making fabric currently covering my workspace 😅) @pimoroni.com
Stock Alert (UK): Raspberry Pi Zero 2 W is In Stock at Pimoroni (UK) https://rpilocator.com?instock&cat=PIZERO2 #rpilocatorPIZERO2 #rpilocatorUK
August 1, 2024 at 11:35 AM
Stock Alert (UK): Raspberry Pi Zero 2 W is In Stock at Pimoroni (UK) https://rpilocator.com?instock&cat=PIZERO2 #rpilocatorPIZERO2 #rpilocatorUK
Pimoroni Clipper LTE 4G Breakout (SP/CE) or SPICE
youtu.be/wKyd7RIGh1U
youtu.be/wKyd7RIGh1U
Pimoroni Clipper LTE 4G Breakout (SP/CE)
YouTube video by RamblingGeek
youtu.be
November 25, 2024 at 8:34 PM
Pimoroni Clipper LTE 4G Breakout (SP/CE) or SPICE
youtu.be/wKyd7RIGh1U
youtu.be/wKyd7RIGh1U
I'd use an old / cheap small TV! The small Pimoroni screens are cute but require setting up, and probably too small for general use.
December 13, 2023 at 6:04 PM
I'd use an old / cheap small TV! The small Pimoroni screens are cute but require setting up, and probably too small for general use.
Komponentteina:
Raspberry pi 5
Pimoroni nvme base
Samsung 980
Open Marine MacArthur HAT
Xenarc 1022tsh
Softana:
OpenPlotter
OpenCPN
Raspberry pi 5
Pimoroni nvme base
Samsung 980
Open Marine MacArthur HAT
Xenarc 1022tsh
Softana:
OpenPlotter
OpenCPN
July 15, 2025 at 11:50 PM
Komponentteina:
Raspberry pi 5
Pimoroni nvme base
Samsung 980
Open Marine MacArthur HAT
Xenarc 1022tsh
Softana:
OpenPlotter
OpenCPN
Raspberry pi 5
Pimoroni nvme base
Samsung 980
Open Marine MacArthur HAT
Xenarc 1022tsh
Softana:
OpenPlotter
OpenCPN
I released some code!
I‘ve pushed my little python script for the @pimoroni.com Inky Impression to my GitHub
Supporting multiple images, scale to fit/fill and rotation if your display has been mounted in a different orientation.
github.com/CBeloch/Inky...
#python #pimoroni #eink
I‘ve pushed my little python script for the @pimoroni.com Inky Impression to my GitHub
Supporting multiple images, scale to fit/fill and rotation if your display has been mounted in a different orientation.
github.com/CBeloch/Inky...
#python #pimoroni #eink
GitHub - CBeloch/Inky-Impression-Demo: A little python script I wrote to display images on my Pimoroni Inky Impression
A little python script I wrote to display images on my Pimoroni Inky Impression - CBeloch/Inky-Impression-Demo
github.com
May 6, 2025 at 6:27 PM
I released some code!
I‘ve pushed my little python script for the @pimoroni.com Inky Impression to my GitHub
Supporting multiple images, scale to fit/fill and rotation if your display has been mounted in a different orientation.
github.com/CBeloch/Inky...
#python #pimoroni #eink
I‘ve pushed my little python script for the @pimoroni.com Inky Impression to my GitHub
Supporting multiple images, scale to fit/fill and rotation if your display has been mounted in a different orientation.
github.com/CBeloch/Inky...
#python #pimoroni #eink
Stock Alert (UK): RPi 5 - 16GB RAM is In Stock at Pimoroni (UK) https://rpilocator.com?inst... #rpilocatorPI5 #rpilocatorUK
Find Raspberry Pi computers in stock - rpilocator
Find Raspberry Pi computers in stock - rpilocator
rpilocator.com
November 10, 2025 at 5:50 PM
Stock Alert (UK): RPi 5 - 16GB RAM is In Stock at Pimoroni (UK) https://rpilocator.com?inst... #rpilocatorPI5 #rpilocatorUK
This looks almost unformatted for now, buuuut… first light of a weather display for my in-laws. Python web app (Open Weather, Natural Resources Wales API, scrapes pollen forecast from Met Office), outputs a web page, saves a correct-size JPEG. Pico W retrieves JPEG & displays it.
Lots still to do.
Lots still to do.
December 22, 2024 at 9:39 AM
This looks almost unformatted for now, buuuut… first light of a weather display for my in-laws. Python web app (Open Weather, Natural Resources Wales API, scrapes pollen forecast from Met Office), outputs a web page, saves a correct-size JPEG. Pico W retrieves JPEG & displays it.
Lots still to do.
Lots still to do.
Managed to find and 3D print an extra layer (www.thingiverse.com/thing:6572956 not designed by me) for my Pibow and use some longer bolts.
January 13, 2025 at 8:10 PM
Managed to find and 3D print an extra layer (www.thingiverse.com/thing:6572956 not designed by me) for my Pibow and use some longer bolts.
November 25, 2024 at 11:58 PM
Playing with one of my Pimoroni Pico Display 2.8 packs.
Decoding text and Display Amiga bitmap fonts
Decoding text and Display Amiga bitmap fonts
August 4, 2024 at 1:53 PM
Playing with one of my Pimoroni Pico Display 2.8 packs.
Decoding text and Display Amiga bitmap fonts
Decoding text and Display Amiga bitmap fonts
Yeah ! I needed more GPIO pins but now I think I could do it all with a single Pimoroni PGA-2350 with it's 48 GPIO pins 😍
PS: I'm not rushing over to Cambs !
PS: I'm not rushing over to Cambs !
March 1, 2025 at 8:17 AM
Yeah ! I needed more GPIO pins but now I think I could do it all with a single Pimoroni PGA-2350 with it's 48 GPIO pins 😍
PS: I'm not rushing over to Cambs !
PS: I'm not rushing over to Cambs !
@pimoroni.com oops it seems I use the wrong contact form (wholesale) instead of the freshdesk form, I blame google there as I was searching for “Pimoroni contact form” and it was the first answer 😅
March 4, 2025 at 1:54 PM
@pimoroni.com oops it seems I use the wrong contact form (wholesale) instead of the freshdesk form, I blame google there as I was searching for “Pimoroni contact form” and it was the first answer 😅