All good! Had 2 buttons swapped, they differ a little bit in size, so the one that was too big was stuck in pressed state once the shell was screwed on and that made it skip the title screen. Done! #atari #lynx #retrorevival #retromodding
July 16, 2025 at 11:18 PM
All good! Had 2 buttons swapped, they differ a little bit in size, so the one that was too big was stuck in pressed state once the shell was screwed on and that made it skip the title screen. Done! #atari #lynx #retrorevival #retromodding
Undid all the stuff to test so now everything is back to stock except that I have CSync wired directly to the DIN. Not to test using 10K pot on the input side of the RGB lines. #neogeo #retrorevival #retromodding
July 19, 2025 at 1:36 PM
Undid all the stuff to test so now everything is back to stock except that I have CSync wired directly to the DIN. Not to test using 10K pot on the input side of the RGB lines. #neogeo #retrorevival #retromodding
SNES Jr RGB mod I installed earlier this year. Cheapie AliExpress board with laughably thin wires but the results are beautiful on my 20" Trinitron I rgb modded as well. This mod I did along with a full recap and voltage regulator swap, it thankfully went smoothly :D #retromodding #snes #trinitron
August 29, 2025 at 10:27 AM
SNES Jr RGB mod I installed earlier this year. Cheapie AliExpress board with laughably thin wires but the results are beautiful on my 20" Trinitron I rgb modded as well. This mod I did along with a full recap and voltage regulator swap, it thankfully went smoothly :D #retromodding #snes #trinitron
Dug up a #sega #mastersystem, try and get rid of the jailbars the cheap way with a rgb bypass without a rgb bypass kit. Wired everything up and... black screen. Spent time trying to figure out why (no signal from original av out either anymore).
1/3
#retrorevival #retromodding
1/3
#retrorevival #retromodding
April 15, 2024 at 12:48 AM
Dug up a #sega #mastersystem, try and get rid of the jailbars the cheap way with a rgb bypass without a rgb bypass kit. Wired everything up and... black screen. Spent time trying to figure out why (no signal from original av out either anymore).
1/3
#retrorevival #retromodding
1/3
#retrorevival #retromodding
Finished recapping the 1CHIP. Next is to test and see if there is any improvement in the video signal over the old caps. Luckily I remembered (this time) to take some photos of the video output before removed Ng the old caps. #snes #sfc #retrorevival #retromodding
August 26, 2025 at 9:02 PM
Finished recapping the 1CHIP. Next is to test and see if there is any improvement in the video signal over the old caps. Luckily I remembered (this time) to take some photos of the video output before removed Ng the old caps. #snes #sfc #retrorevival #retromodding
#RetroUpgrade This beautiful Spyro themed #GameboyAdvance system is ready forfor action!
✔️ BACKLIT IPS LCD
✔️ Glass Lens
✔️ New Parts
✔️ Official Nintendo Motherboard
Available instore at #Videogamesnewyork
#RETROUPGRADE #Gameboymods #retromodding
✔️ BACKLIT IPS LCD
✔️ Glass Lens
✔️ New Parts
✔️ Official Nintendo Motherboard
Available instore at #Videogamesnewyork
#RETROUPGRADE #Gameboymods #retromodding
November 17, 2024 at 11:45 PM
#RetroUpgrade This beautiful Spyro themed #GameboyAdvance system is ready forfor action!
✔️ BACKLIT IPS LCD
✔️ Glass Lens
✔️ New Parts
✔️ Official Nintendo Motherboard
Available instore at #Videogamesnewyork
#RETROUPGRADE #Gameboymods #retromodding
✔️ BACKLIT IPS LCD
✔️ Glass Lens
✔️ New Parts
✔️ Official Nintendo Motherboard
Available instore at #Videogamesnewyork
#RETROUPGRADE #Gameboymods #retromodding
A #GameboyAdvance soo FRESH & CLEAN only #MrClean himself deserves to hold it!
✔️ BACKLIT IPS LCD
✔️ Glass Lens
✔️ New Parts
✔️ Official Nintendo Motherboard
Parts and systems are available instore at #Videogamesnewyork
#RETROUPGRADE #Gameboymods #retromodding
✔️ BACKLIT IPS LCD
✔️ Glass Lens
✔️ New Parts
✔️ Official Nintendo Motherboard
Parts and systems are available instore at #Videogamesnewyork
#RETROUPGRADE #Gameboymods #retromodding
November 17, 2024 at 11:47 PM
A #GameboyAdvance soo FRESH & CLEAN only #MrClean himself deserves to hold it!
✔️ BACKLIT IPS LCD
✔️ Glass Lens
✔️ New Parts
✔️ Official Nintendo Motherboard
Parts and systems are available instore at #Videogamesnewyork
#RETROUPGRADE #Gameboymods #retromodding
✔️ BACKLIT IPS LCD
✔️ Glass Lens
✔️ New Parts
✔️ Official Nintendo Motherboard
Parts and systems are available instore at #Videogamesnewyork
#RETROUPGRADE #Gameboymods #retromodding
Wasn't sure if I had to remove the cap/battery, so I asked Zaxour and got an answer right away. It can be left it or removed, doesn't matter. So then I tested it and it works! Time to close her up now. Good for another 10 years at least. #pcengine #retromodding #retrorevival #PCエンジン
July 14, 2025 at 11:30 PM
Wasn't sure if I had to remove the cap/battery, so I asked Zaxour and got an answer right away. It can be left it or removed, doesn't matter. So then I tested it and it works! Time to close her up now. Good for another 10 years at least. #pcengine #retromodding #retrorevival #PCエンジン
Big tangent of a thread of #retromodding and Sony #Trinitron RGB modding hijinks and misadventures I've been on the past year, poured my heart out writing this so even though it's a bit unfocused, I'd love for ya to give it an eyeball or two.
SNES Jr RGB mod I installed earlier this year. Cheapie AliExpress board with laughably thin wires but the results are beautiful on my 20" Trinitron I rgb modded as well. This mod I did along with a full recap and voltage regulator swap, it thankfully went smoothly :D #retromodding #snes #trinitron
August 29, 2025 at 11:30 AM
Big tangent of a thread of #retromodding and Sony #Trinitron RGB modding hijinks and misadventures I've been on the past year, poured my heart out writing this so even though it's a bit unfocused, I'd love for ya to give it an eyeball or two.
Thanks everyone for hanging on streams this week.
We got the Shiny Lizard and modded my childhood Game Boy.
There are no streams next week, but we will be back the week after.
#Pokemon #Gameboy #GameboyModding #Retro #RetroModding
We got the Shiny Lizard and modded my childhood Game Boy.
There are no streams next week, but we will be back the week after.
#Pokemon #Gameboy #GameboyModding #Retro #RetroModding
October 23, 2024 at 6:24 PM
Thanks everyone for hanging on streams this week.
We got the Shiny Lizard and modded my childhood Game Boy.
There are no streams next week, but we will be back the week after.
#Pokemon #Gameboy #GameboyModding #Retro #RetroModding
We got the Shiny Lizard and modded my childhood Game Boy.
There are no streams next week, but we will be back the week after.
#Pokemon #Gameboy #GameboyModding #Retro #RetroModding
Soldered @zaxour.bsky.social's NEC FRAM Adapter in place. Cleaned up, Positioned the FRAM chip (FM16W08-SG) and soldered it onto the adapter. Let's see if it works. #pcengine #retromodding #PCエンジン
July 14, 2025 at 11:10 PM
Soldered @zaxour.bsky.social's NEC FRAM Adapter in place. Cleaned up, Positioned the FRAM chip (FM16W08-SG) and soldered it onto the adapter. Let's see if it works. #pcengine #retromodding #PCエンジン
This is the Microvision screen
Not the lens, not the glass over the screen, this is the WHOLE thing
Seems impossible until you see light hitting the screen from the right angle
And it just floats there held in with tension to contact to the main board
#retrogaming #retromodding
Not the lens, not the glass over the screen, this is the WHOLE thing
Seems impossible until you see light hitting the screen from the right angle
And it just floats there held in with tension to contact to the main board
#retrogaming #retromodding
June 23, 2024 at 6:24 PM
This is the Microvision screen
Not the lens, not the glass over the screen, this is the WHOLE thing
Seems impossible until you see light hitting the screen from the right angle
And it just floats there held in with tension to contact to the main board
#retrogaming #retromodding
Not the lens, not the glass over the screen, this is the WHOLE thing
Seems impossible until you see light hitting the screen from the right angle
And it just floats there held in with tension to contact to the main board
#retrogaming #retromodding
Oh, i thought it was RetroModding. xD
August 5, 2025 at 4:28 PM
Oh, i thought it was RetroModding. xD
Started on the #atari #lynx 2 McWill (ali repro) LCD mod. Removed the unneeded components and put them in a bag for safe keeping. Will keep the brightness dial as I will not adding a VGA port to the Lynx. #retromodding #retrorevival
March 25, 2025 at 11:07 PM
Started on the #atari #lynx 2 McWill (ali repro) LCD mod. Removed the unneeded components and put them in a bag for safe keeping. Will keep the brightness dial as I will not adding a VGA port to the Lynx. #retromodding #retrorevival
June 13, 2025 at 8:01 PM
---⚙️---
- Coque de Retromodding
- Boutons de Kitsch-Bent
- C'est une Game Boy DMG Color (DMGC), un GB qui peut jouer à la fois aux jeux GB et GBC. Les PCBs ont été créées par @mousebitelabs.bsky.social
🎁
- Coque de Retromodding
- Boutons de Kitsch-Bent
- C'est une Game Boy DMG Color (DMGC), un GB qui peut jouer à la fois aux jeux GB et GBC. Les PCBs ont été créées par @mousebitelabs.bsky.social
🎁
December 25, 2024 at 10:13 AM
---⚙️---
- Coque de Retromodding
- Boutons de Kitsch-Bent
- C'est une Game Boy DMG Color (DMGC), un GB qui peut jouer à la fois aux jeux GB et GBC. Les PCBs ont été créées par @mousebitelabs.bsky.social
🎁
- Coque de Retromodding
- Boutons de Kitsch-Bent
- C'est une Game Boy DMG Color (DMGC), un GB qui peut jouer à la fois aux jeux GB et GBC. Les PCBs ont été créées par @mousebitelabs.bsky.social
🎁
De decided not to touch the RGB, since they are already good as it is in the AES3-5. So now I will try to isolate CSync but also try to keep composite. Had to resort to hot glue though. #snk #neogeo #retromodding
July 19, 2025 at 6:52 PM
De decided not to touch the RGB, since they are already good as it is in the AES3-5. So now I will try to isolate CSync but also try to keep composite. Had to resort to hot glue though. #snk #neogeo #retromodding
Here's my most recent modding project! A Gamecube I made for my oshi @kumogorogoro.bsky.social! It's running picoboot to enable the Gameboy player, a Pluto II for HDMI, and the Blueretro adapter from Laser Bear Industries. Art by @thechubbcatz.bsky.social
#retromodding #retrogaming #vtuber #vtubers
#retromodding #retrogaming #vtuber #vtubers
October 24, 2024 at 2:52 AM
Here's my most recent modding project! A Gamecube I made for my oshi @kumogorogoro.bsky.social! It's running picoboot to enable the Gameboy player, a Pluto II for HDMI, and the Blueretro adapter from Laser Bear Industries. Art by @thechubbcatz.bsky.social
#retromodding #retrogaming #vtuber #vtubers
#retromodding #retrogaming #vtuber #vtubers
Bluesky's Top 10 Trending Words from the Past 10 Minutes:
️⚠️💨3 - ukraine
️⚠️💨3 - curtis
️⚠️💨2 - shakir
️⚠️💨2 - falcons
️⚠️💨2 - samuel
️⚠️💨2 - penix
️⚠️💨2 - seahawks
️⚠️💨1 - geno
️⚠️💨1 - gaza
️⚠️💨1 - broncos
(tap/click to see all posts on Bluesky featuring that word!)
#ListenToBlackVoices
November 17, 2024 at 11:53 PM
Removed the SRAM chip. Used low melt solder, flux and the heat gun. Then cleaned it up with IPA. #pcengine #retromodding #PCエンジン
July 14, 2025 at 10:30 PM
Removed the SRAM chip. Used low melt solder, flux and the heat gun. Then cleaned it up with IPA. #pcengine #retromodding #PCエンジン
So happy to see this screen. Phew. Still working. Curiosity almost killed my 1CHIP. Got this a couple of years ago through FromJapan. The 2nd 1CHIP too, but that one was #junk and cost about 80USD. 80USD of spare parts now :(. Closing this thread. #snes #superfamicom #retrorevival #sfc #retromodding
August 25, 2025 at 9:54 PM
So happy to see this screen. Phew. Still working. Curiosity almost killed my 1CHIP. Got this a couple of years ago through FromJapan. The 2nd 1CHIP too, but that one was #junk and cost about 80USD. 80USD of spare parts now :(. Closing this thread. #snes #superfamicom #retrorevival #sfc #retromodding
Now available : 2 in 1 Game Gear Cart ReBoard ! Repair your corroded game gear carts with these high quality reproduction boards!
Buy them here: www.projectrelabel.com/sega/game-ge...
#retro #gamegear #retromodding
Buy them here: www.projectrelabel.com/sega/game-ge...
#retro #gamegear #retromodding
November 27, 2024 at 12:01 AM
Now available : 2 in 1 Game Gear Cart ReBoard ! Repair your corroded game gear carts with these high quality reproduction boards!
Buy them here: www.projectrelabel.com/sega/game-ge...
#retro #gamegear #retromodding
Buy them here: www.projectrelabel.com/sega/game-ge...
#retro #gamegear #retromodding
Finished the #pcengine cap map, sharing for all to use. Made it available to @DerfJagged@x so it can be added to #consolemodswiki. It should be available there in more formats (pdf) and versions (with and without pcb photo).
#retrorevival #retrogaming #retromodding
#retrorevival #retrogaming #retromodding
June 12, 2024 at 9:30 AM
Finished the #pcengine cap map, sharing for all to use. Made it available to @DerfJagged@x so it can be added to #consolemodswiki. It should be available there in more formats (pdf) and versions (with and without pcb photo).
#retrorevival #retrogaming #retromodding
#retrorevival #retrogaming #retromodding
I've mentioned that I do some modding. Here's the first project I did on stream. A GBA with a new motherboard, new shell, laminated IPS screen, and usb-c rechargeable battery, all from FunnyPlaying. It also has HDMI output.
#retromodding #retrogaming
#retromodding #retrogaming
October 22, 2024 at 10:53 AM
I've mentioned that I do some modding. Here's the first project I did on stream. A GBA with a new motherboard, new shell, laminated IPS screen, and usb-c rechargeable battery, all from FunnyPlaying. It also has HDMI output.
#retromodding #retrogaming
#retromodding #retrogaming
I know what you mean. It's still hard to remember RetroModding and ModRetro are not connected
December 16, 2024 at 3:32 PM
I know what you mean. It's still hard to remember RetroModding and ModRetro are not connected