Adam
banner
adambreece.bsky.social
Adam
@adambreece.bsky.social
Maker, photographer, game developer. 🇺🇸 living in 🇩🇪.
'Mein bestes Foto 2025' #FotoVorschlag

Bestes ist schwer zu entscheiden, aber dieses Foto von einem Freund, ist das was mir die größte Freude bereitet.

#Fotografie #Foto #Fotografie #Photo #Photography #Mono #B&W #bnw #BWFri #ColorADay
January 2, 2026 at 3:40 PM
Thank you very much!
December 6, 2025 at 1:14 AM
'Graffiti' #FotoVorschlag
November 27, 2025 at 5:45 PM
A closer look at our #small insect friend.

#BlueSkyArtShow
November 22, 2025 at 7:11 PM
'Nicht ganz scharf aber trotzdem gut' #FotoVorschlag

Dreharbeiten oder so. Bin kein gelernter Regisseur.
November 7, 2025 at 1:25 PM
Is your top infill set to Monotonic? Try Monotonic Lines instead. Slicers based on Slic3r/PrusaSlicer tend to over extrude on very short moves such as the turnaround at the end of the monotonic top infill.

Also worth checking the print isn't warped and that the nozzle isn't too close to the bed.
November 3, 2025 at 6:07 PM
How does this look if you don't instrument anything deeper than Zone.AddLight? All those Marker.Begin()/End() calls can add a lot of overhead. In my little test scene, 30k rounds of inline Bresenham is ~2x faster than Math.Abs(), but instrumenting every Math.Abs() call is ~100x slower.
November 2, 2025 at 4:57 PM
'Computer sagt Nein' #FotoVorschlag

...falsche Walzenstellung.'

Ironischerweise ist die Turing-Bombe keine "Turing-Maschine."
October 27, 2025 at 10:51 AM
'Was sich dreht (kein Rad!)'
#FotoVorschlag

Einlauf des Turbojet-Triebwerks eines Pratt & Whitney J58 aus dem #SR-71 Aufklärungsflugzeug.
October 23, 2025 at 10:03 AM
'Perspektivwechsel' #FotoVorschlag

Über uns fliegen Fische.
October 16, 2025 at 7:51 PM
'Himmelstürmer' #FotoVorschlag

SR-71 S1030 Drückanzug der NASA.
October 12, 2025 at 4:07 PM
'Ich packe meinen Koffer' #FotoVorschlag
October 5, 2025 at 2:36 PM
'Nachtschicht' #FotoVorschlag
September 20, 2025 at 12:24 PM
'Blaue Stunde' #fotovorschlag

#Seattle Space Needle
September 11, 2025 at 5:33 PM
'Leuchtreklame' #FotoVorschlag
September 7, 2025 at 10:30 AM
It's pricier than the truly entry level options, but for the cost the Prusa Core One is extremely capable in addition to being user-, consumer-, and repair-friendly.

Do you have any specific plans for it in mind?
August 31, 2025 at 6:18 PM
'Überbelichtet' #FotoVorschlag

Oasis auf dem Parkplatz. Hamburg.

#fotografie #photography #sonyalpha #a7cr
August 10, 2025 at 4:38 PM
'Sonnenuntergang oder Sonnenaufgang' #FotoVorschlag

Panoramafoto des Sonnenaufgangs über der Seattle Waterfront und Elliot Bay. Aufgenommen vom Pike Place Market.

Wegen der Bluesky Auflösungsgrenzen in 4 Teile geschnitten.

#sonyalpha A7Cr + 50mm f/1.4 GM
July 24, 2025 at 11:42 AM
'Technik, die begeistert' #FotoVorschlag

Elektromechanische Flipperautomaten begeistern von innen und außen.

#pinball
July 4, 2025 at 9:26 AM
'Zwischen Welten – Übergänge und Schwellen' #FotoVorschlag

Skybridge am Pike Place Market, Seattle

#SonyAlpha a7CR, 50mm f/1.4 GM
June 28, 2025 at 11:53 AM
'Kommunikation' #FotoVorschlag

Walzensatz eines Nachbaus der Turing-Bombe im Bletchley Park. Während des Zweiten Weltkriegs wurden über 200 Turing-Bomben eingesetzt, um die verschlüsselte Funksprüche der Achsenmächten zu entziffern.
June 24, 2025 at 10:25 AM
If it's the switches that went bad then it's not too hard to solder in new, better ones. I put in Kailh red dots (~$5 for 10) 5 years ago and they're still going strong. A Pinecil, solder, wick, flux, and the switches should cost you less than a new g502.
June 7, 2025 at 10:43 AM