A short fun project, the figure is not 100% accurate to the in game model, but hopefully i can make that up with paint details. While shes not as tall as in game, she still towers over my other 1:12 scale figures! I don't enjoy painting as much, but I'm happy with my results!

A simple print, base coated blue for the squares, and red for the longer one. Then added silver, white and yellow, then a ton of brown, black washes, with a few rust effects with a sponge, finished with silver dry brushing.

Download here
makerworld.com/en/models/10...

Grisa with a MUCH spookier setup! Music is Thriller, covered by Scandroid!

#SnailShell #RPG03ZombieGrisa #ZombieGrisa #Karaoke #Music #Thriller #Scandroid #ToyPhotography @wozhike.bsky.social

i forgot to unselect that automatic smoothing view in blender, so what i thought would be a smooth hole, was actually a low poly hole that I'm not too happy with, and the eyes need smoothing as well. Ill continue to work on this model, but if you want it now, let me know.

The eyes had a little bump to them, so they needed to be sanded off. since i didn't have a bright enough green and gold for the eyes, i used cheap craft paint that was a pain to use, but after a clear coat, it settled well.

Printing it out of resin, then a quick test fit of darkness to make sure it was worth proceeding, i did use a similar scaled 3d model before hand to make sure most figures would fit. then hit it with a coat of green, and painted on the white section. The green was too dark.

Final touch ups were the details on the bottles, and then painting the door cover. Done!
Files FREE here!
Machine
makerworld.com/en/models/23...
Bottle
makerworld.com/en/models/43...

A little secret message on the side, then it was time to paint some bottles and the front door cover. Got a little ahead of myself before i had everything printed lol.
I was going to print a rack for the cola, but using real wires was just easier and better looking.

Printed in resin, then gave it a spray paint base coat of red. After adding the base colors, it was time to paint dirt and rust using a piece of sponge and gently dabbing.

The teeth needed highlighting as well, so went with a white dry brush, yellowed it, then brought the colors down with another wash of brown, and done!
File is available here for FREE!
www.thingiverse.com/thing:1611752 (its the full skull version)

A quick base coat of black, and posed with what should be a similar scale to what the NCR ranger should be, looks like a good size. Started adding the base colors, then applying paint washes to bring out details in the sculpt.

Well, the first print was way too small, i just used a 1/12 scale head and tried it, but after some quick math, got it to a more fitting scale, also hey, the jaw opens and closes!

After a black primer, i used some citadel Khorne Red for the seats, and then a drybrush of grey, then a light matte clear coat to protect the paint.
Files are FREE
makerworld.com/en/models/15...
makerworld.com/en/models/15...

Printed at the scale they were presented, 100%, measuring them, i would have done 90% for a better fit, but i wanted more room for the larger Mythic Legions. If this were for Figma or Snail shell, i would do, 90%, maybe even 80%