I welded up a battery tray to install a lithium iron phosphate battery in the golf cart to replace the lead acid batteries.

I built this counterbalance to go on the back of the tractor to offset the way when using the front end loader

Bead blasting one of the hydraulic hose supports for the manlift.

I made a new mounting bracket for the batteries in the bulldozer. The hooks were made from quarter inch stainless steel rod, threaded with a 1/4-20 die on the lathe and then heated to cherry red and bent over in the vise to make the hook.

Gate project completed

Removing the old gate posts today, a tractor with a front end loader sure does make it easy.

Cross braces are painted

Tig welding skills, hopefully slightly improving.

After welding, I am still learning.

About to start welding, this is my set up to make sure everything is square.

Designed and 3-D printed this dust collector for my Dremel saw.

The dogs and I went for a walk this morning. It is 43F here so that means we can enjoy the woods without bringing ticks home with us.

Replaced the pistons in my pressure washer today. One of the old pistons was cracked. That allowed water to leak into the oil.

This was my build your own radiator from a kit project for a Komatsu D20P–6. The OEM radiator is $3500. The kit is $300 but you have to learn to TIG weld.